From mboxrd@z Thu Jan 1 00:00:00 1970 From: scottwood@freescale.com (Scott Wood) Date: Tue, 15 Sep 2015 00:59:14 -0500 Subject: [linuxppc-release] [PATCH] arm64: dts: fsl-ls2085a: Add serial aliases In-Reply-To: References: <20150915004827.GA19862@home.buserror.net> Message-ID: <1442296754.2909.126.camel@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 2015-09-15 at 00:57 -0500, Sharma Bhupesh-B45370 wrote: > > From: linuxppc-release-bounces at linux.freescale.net[mailto:linuxppc- > > release-bounces at linux.freescale.net] On Behalf Of Scott Wood > > Sent: Tuesday, September 15, 2015 6:18 AM > > > > These will allow U-Boot to set linux,stdout-path in /chosen based on the > > active console device, which will allow devicetree-based earlycon. > > > > Signed-off-by: Scott Wood > > --- > > arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > index e281ceb..eae454e 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > @@ -55,6 +55,11 @@ > > #address-cells = <2>; > > #size-cells = <2>; > > > > + aliases { > > + serial0 = &serial0; > > + serial1 = &serial1; > > + }; > > + > > cpus { > > #address-cells = <2>; > > #size-cells = <0>; > > -- > > Rebase this to my LS2080A v2 DTS sent some time ago, as LS2085A is now > renamed to LS2080A. Patchwork link? How long ago? When is it going to be merged? -Scott