From: yassinjaffer@gmail.com (yassinjaffer at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] devicetree: bindings:Allwinner sun4i keypad
Date: Wed, 16 Sep 2015 00:05:57 +1000	[thread overview]
Message-ID: <1442325957-10102-5-git-send-email-yassinjaffer@gmail.com> (raw)
In-Reply-To: <1442325957-10102-1-git-send-email-yassinjaffer@gmail.com>
From: Yassin Jaffer <yassinjaffer@gmail.com>
Signed-off-by: Yassin Jaffer <yassinjaffer@gmail.com>
---
 .../devicetree/bindings/input/sun4i-keypad.txt     | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/sun4i-keypad.txt
diff --git a/Documentation/devicetree/bindings/input/sun4i-keypad.txt b/Documentation/devicetree/bindings/input/sun4i-keypad.txt
new file mode 100644
index 0000000..60ed0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sun4i-keypad.txt
@@ -0,0 +1,56 @@
+Allwinner sun4i keypad
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-keypad"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - clocks : shall reference keypad controller clocks.
+ - clock-names : keypad controller internal clock names. Shall contain :
+    * "apb" : APB gating clock
+    * "keypad" : keypad controller clock
+
+Required Board Specific Properties:
+- pinctrl-names: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- pinctrl-0: The definition can be found at
+pinctrl/pinctrl-bindings.txt.
+
+- linux,keymap: The definition can be found at
+bindings/input/matrix-keymap.txt.
+
+Optional properties:
+ - scan-cycle: device specific scan cycle
+ - debounce-cycle: device specific debounce cycle
+ - autorepeat: If specified device will autorepeat
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	kp: kp at 01c23000 {
+		compatible = "allwinner,sun4i-a10-keypad";
+		reg = <0x01c23000 0x400>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&apb0_gates 10>, <&keypad_clk>;
+		clock-names = "apb", "keypad";
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows>, <&keypad_cols>;
+		linux,keymap = <0x00000067	/* KEY_UP */
+				0x0001006c	/* KEY_DOWN */
+				0x00020072	/* KEY_VOLUMEDOWN */
+				0x00030066	/* KEY_HOME */
+				0x0100006a	/* KEY_RIGHT */
+				0x01010069	/* KEY_LEFT */
+				0x0102001c	/* KEY_ENTER */
+				0x01030073	/* KEY_VOLUMEUP */
+				0x02000040	/* KEY_F6 */
+				0x02010042	/* KEY_F8 */
+				0x02020043	/* KEY_F9 */
+				0x02030044	/* KEY_F10 */
+				0x0300003b	/* KEY_F1 */
+				0x0301003c	/* KEY_F2 */
+				0x0302003d	/* KEY_F3 */
+				0x03030074>;	/* KEY_POWER */
+	};
-- 
1.9.1
next prev parent reply	other threads:[~2015-09-15 14:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-15 14:05 NEW SUN4i KEYPAD DRIVER yassinjaffer at gmail.com
2015-09-15 14:05 ` [PATCH 1/4] ARM:dts:sun7i: Add keypad clk node yassinjaffer at gmail.com
2015-09-16  5:11   ` Maxime Ripard
2015-09-15 14:05 ` [PATCH 2/4] ARM: dts: sun7i: Add keypad node to Allwinner A20 SoC yassinjaffer at gmail.com
2015-09-17 11:29   ` Maxime Ripard
2015-09-17 14:20     ` [linux-sunxi] " Chen-Yu Tsai
2015-09-15 14:05 ` [PATCH 3/4] input: Add new sun4i-keypad driver yassinjaffer at gmail.com
2015-09-17 13:05   ` Maxime Ripard
     [not found]     ` <CAJzetvvUscEgTQ0Sr-BF7D6rzN_bfWT1KikRqz+BvSV-2+TWrw@mail.gmail.com>
2015-09-18  9:44       ` Maxime Ripard
2015-09-21 17:19   ` Dmitry Torokhov
2015-09-15 14:05 ` yassinjaffer at gmail.com [this message]
2015-09-15 15:30   ` [PATCH 4/4] devicetree: bindings:Allwinner sun4i keypad Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox
  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):
  git send-email \
    --in-reply-to=1442325957-10102-5-git-send-email-yassinjaffer@gmail.com \
    --to=yassinjaffer@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY
  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
  Be sure your reply has a Subject: header at the top and a blank line
  before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).