[PATCH 0/3] arm64: dts: berlin4ct: add GPIO support

[PATCH 0/3] arm64: dts: berlin4ct: add GPIO support

[Jisheng Zhang]

Marvell berlin4ct SoC has 6 GPIO ports powered by snps,dw-apb-gpio. patch1
enables ARCH_REQUIRE_GPIOLIB for ARCH_BERLIN. patch2 add GPIO nodes in the
SoC dtsi. The last patch add board dts file for STB reference board.

Jisheng Zhang (3):
  arm64: berlin: enable ARCH_REQUIRE_GPIOLIB
  arm64: dts: berlin4ct: add GPIO nodes
  arm64: dts: add dts file for Marvell Berlin4CT STB board

 arch/arm64/Kconfig.platforms                  |   1 +
 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts |  66 ++++++++++++++
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi    | 120 ++++++++++++++++++++++++++
 3 files changed, 187 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts

-- 
2.5.1

[PATCH 1/3] arm64: berlin: enable ARCH_REQUIRE_GPIOLIB

[Jisheng Zhang]

All berlin SoCs have GPIOs driven by the dwapb GPIO driver. Add GPIOLIB
as a dependency to be able to support them.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a1..c6e2c75 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -7,6 +7,7 @@ config ARCH_BCM_IPROC
 
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
+	select ARCH_REQUIRE_GPIOLIB
 	select DW_APB_ICTL
 	help
 	  This enables support for Marvell Berlin SoC Family
-- 
2.5.1

[PATCH 1/3] arm64: berlin: enable ARCH_REQUIRE_GPIOLIB

[Sebastian Hesselbarth]

On 18.09.2015 15:47, Jisheng Zhang wrote:
> All berlin SoCs have GPIOs driven by the dwapb GPIO driver. Add GPIOLIB
> as a dependency to be able to support them.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>

Applied to berlin64/soc.

Thanks,
   Sebastian

> ---
>   arch/arm64/Kconfig.platforms | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 23800a1..c6e2c75 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -7,6 +7,7 @@ config ARCH_BCM_IPROC
>
>   config ARCH_BERLIN
>   	bool "Marvell Berlin SoC Family"
> +	select ARCH_REQUIRE_GPIOLIB
>   	select DW_APB_ICTL
>   	help
>   	  This enables support for Marvell Berlin SoC Family
>

[PATCH 2/3] arm64: dts: berlin4ct: add GPIO nodes

[Jisheng Zhang]

Marvell berlin4ct SoC has 6 GPIO ports powered by snps,dw-apb-gpio. This
patch adds the corresponding device tree nodes.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 120 +++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index dd4a10d..a3b5f1d 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -135,6 +135,96 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		apb at e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio at 0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port at 0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio at 0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port at 1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio at 0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port at 2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio at 1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port at 3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			aic: interrupt-controller at 3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -151,6 +241,36 @@
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			sm_gpio0: gpio at 8000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x8000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port at 4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio1: gpio at 9000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x9000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port at 5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			uart0: uart at d000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xd000 0x100>;
-- 
2.5.1

[PATCH 3/3] arm64: dts: add dts file for Marvell Berlin4CT STB board

[Jisheng Zhang]

This patch adds dts for the Berlin4CT STB reference board which is also
based on the Berlin4CT SoC. The Berlin4CT DMP board will be deprecated as
time goes.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 66 +++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
new file mode 100644
index 0000000..348c37e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT STB board";
+	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.5.1

[PATCH 3/3] arm64: dts: add dts file for Marvell Berlin4CT STB board

[Sebastian Hesselbarth]

On 18.09.2015 15:47, Jisheng Zhang wrote:
> This patch adds dts for the Berlin4CT STB reference board which is also
> based on the Berlin4CT SoC. The Berlin4CT DMP board will be deprecated as
> time goes.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
>   arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 66 +++++++++++++++++++++++++++

This is missing the corresponding Makefile change to add the
board to the default dtb build list.

I've fixed it up and

Applied the two dts patches to berlin64/dt

Sebastian

>   1 file changed, 66 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
>
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
> new file mode 100644
> index 0000000..348c37e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (C) 2015 Marvell Technology Group Ltd.
> + *
> + * Author: Jisheng Zhang <jszhang@marvell.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "berlin4ct.dtsi"
> +
> +/ {
> +	model = "Marvell BG4CT STB board";
> +	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		/* the first 16MB is for firmwares' usage */
> +		reg = <0 0x01000000 0 0x7f000000>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
>

[PATCH 3/3] arm64: dts: add dts file for Marvell Berlin4CT STB board

[Jisheng Zhang]

On Sun, 20 Sep 2015 21:06:19 +0200
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> wrote:

> On 18.09.2015 15:47, Jisheng Zhang wrote:
> > This patch adds dts for the Berlin4CT STB reference board which is also
> > based on the Berlin4CT SoC. The Berlin4CT DMP board will be deprecated as
> > time goes.
> >
> > Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> > ---
> >   arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 66 +++++++++++++++++++++++++++
> 
> This is missing the corresponding Makefile change to add the
> board to the default dtb build list.

oops, sorry, I missed it.

> 
> I've fixed it up and
> 
> Applied the two dts patches to berlin64/dt

Thanks a lot ;)

> 
> Sebastian
> 
> >   1 file changed, 66 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
> >
> > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
> > new file mode 100644
> > index 0000000..348c37e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
> > @@ -0,0 +1,66 @@
> > +/*
> > + * Copyright (C) 2015 Marvell Technology Group Ltd.
> > + *
> > + * Author: Jisheng Zhang <jszhang@marvell.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPLv2 or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This library is free software; you can redistribute it and/or
> > + *     modify it under the terms of the GNU General Public License as
> > + *     published by the Free Software Foundation; either version 2 of the
> > + *     License, or (at your option) any later version.
> > + *
> > + *     This library is distributed in the hope that it will be useful,
> > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *     GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + *  b) Permission is hereby granted, free of charge, to any person
> > + *     obtaining a copy of this software and associated documentation
> > + *     files (the "Software"), to deal in the Software without
> > + *     restriction, including without limitation the rights to use,
> > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > + *     sell copies of the Software, and to permit persons to whom the
> > + *     Software is furnished to do so, subject to the following
> > + *     conditions:
> > + *
> > + *     The above copyright notice and this permission notice shall be
> > + *     included in all copies or substantial portions of the Software.
> > + *
> > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + *     OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "berlin4ct.dtsi"
> > +
> > +/ {
> > +	model = "Marvell BG4CT STB board";
> > +	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +
> > +	memory {
> > +		device_type = "memory";
> > +		/* the first 16MB is for firmwares' usage */
> > +		reg = <0 0x01000000 0 0x7f000000>;
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> >
>