From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] clk: berlin: add common pll driver
Date: Tue, 22 Sep 2015 22:12:32 +0800 [thread overview]
Message-ID: <1442931156-5877-2-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1442931156-5877-1-git-send-email-jszhang@marvell.com>
Add pll driver for Marvell SoCs newer than BG2, BG2CD, BG2Q.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
drivers/clk/berlin/Makefile | 2 +-
drivers/clk/berlin/pll.c | 119 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/berlin/pll.c
diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index 2a36ab7..747700d 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1,4 +1,4 @@
-obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o
+obj-y += pll.o berlin2-avpll.o berlin2-pll.o berlin2-div.o
obj-$(CONFIG_MACH_BERLIN_BG2) += bg2.o
obj-$(CONFIG_MACH_BERLIN_BG2CD) += bg2.o
obj-$(CONFIG_MACH_BERLIN_BG2Q) += bg2q.o
diff --git a/drivers/clk/berlin/pll.c b/drivers/clk/berlin/pll.c
new file mode 100644
index 0000000..9aad0b6
--- /dev/null
+++ b/drivers/clk/berlin/pll.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+
+#define PLL_CTRL0 0x0
+#define PLL_CTRL1 0x4
+#define PLL_CTRL2 0x8
+#define PLL_CTRL3 0xC
+#define PLL_CTRL4 0x10
+#define PLL_STATUS 0x14
+
+#define PLL_SOURCE_MAX 2
+
+struct berlin_pll {
+ struct clk_hw hw;
+ void __iomem *ctrl;
+ void __iomem *bypass;
+ u8 bypass_shift;
+};
+
+#define to_berlin_pll(hw) container_of(hw, struct berlin_pll, hw)
+
+static u8 vcodiv_berlin[] = {1, 2, 4, 8, 16, 32, 64, 128};
+
+static unsigned long berlin_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 val, fbdiv, rfdiv, vcodivsel, bypass;
+ struct berlin_pll *pll = to_berlin_pll(hw);
+
+ bypass = readl_relaxed(pll->bypass);
+ if (bypass & (1 << pll->bypass_shift))
+ return parent_rate;
+
+ val = readl_relaxed(pll->ctrl + PLL_CTRL0);
+ fbdiv = (val >> 12) & 0x1FF;
+ rfdiv = (val >> 3) & 0x1FF;
+ val = readl_relaxed(pll->ctrl + PLL_CTRL1);
+ vcodivsel = (val >> 9) & 0x7;
+ return parent_rate * fbdiv * 4 / rfdiv /
+ vcodiv_berlin[vcodivsel];
+}
+
+static u8 berlin_pll_get_parent(struct clk_hw *hw)
+{
+ struct berlin_pll *pll = to_berlin_pll(hw);
+ u32 bypass = readl_relaxed(pll->bypass);
+
+ if (bypass & (1 << pll->bypass_shift))
+ return 1;
+ else
+ return 0;
+}
+
+static const struct clk_ops berlin_pll_ops = {
+ .recalc_rate = berlin_pll_recalc_rate,
+ .get_parent = berlin_pll_get_parent,
+};
+
+void __init berlin_pll_setup(struct device_node *np)
+{
+ struct clk_init_data init;
+ struct berlin_pll *pll;
+ const char *parent_names[PLL_SOURCE_MAX];
+ struct clk *clk;
+ int ret, num_parents;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents <= 0 || num_parents > PLL_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (WARN_ON(!pll))
+ return;
+
+ pll->ctrl = of_iomap(np, 0);
+ pll->bypass = of_iomap(np, 1);
+ ret = of_property_read_u8(np, "bypass-shift", &pll->bypass_shift);
+ if (WARN_ON(!pll->ctrl || !pll->bypass || ret))
+ return;
+
+ init.name = np->name;
+ init.ops = &berlin_pll_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ if (WARN_ON(ret))
+ return;
+}
+CLK_OF_DECLARE(berlin_pll, "marvell,berlin-pll", berlin_pll_setup);
--
2.5.3
next prev parent reply other threads:[~2015-09-22 14:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-22 14:12 [PATCH 0/5] Add Marvell berlin4ct clk support Jisheng Zhang
2015-09-22 14:12 ` Jisheng Zhang [this message]
2015-10-01 22:32 ` [PATCH 1/5] clk: berlin: add common pll driver Stephen Boyd
2015-10-08 10:52 ` Jisheng Zhang
2015-09-22 14:12 ` [PATCH 2/5] clk: berlin: add common clk driver for newer SoCs Jisheng Zhang
2015-10-01 22:38 ` Stephen Boyd
2015-09-22 14:12 ` [PATCH 3/5] clk: berlin: add clk support for berlin4ct Jisheng Zhang
2015-10-01 22:42 ` Stephen Boyd
2015-09-22 14:12 ` [PATCH 4/5] dt-bindings: add binding for marvell berlin4ct SoC Jisheng Zhang
2015-10-01 22:50 ` Stephen Boyd
2015-10-08 11:13 ` Jisheng Zhang
2015-09-22 14:12 ` [PATCH 5/5] arm64: dts: berlin4ct: add pll and clock nodes Jisheng Zhang
2015-09-23 1:55 ` [PATCH 0/5] Add Marvell berlin4ct clk support Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442931156-5877-2-git-send-email-jszhang@marvell.com \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).