linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: agross@codeaurora.org (Andy Gross)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v3 01/10] soc: qcom: documentation: Update SMD/RPM Docs
Date: Thu, 24 Sep 2015 14:18:50 -0500	[thread overview]
Message-ID: <1443122339-13917-2-git-send-email-agross@codeaurora.org> (raw)
In-Reply-To: <1443122339-13917-1-git-send-email-agross@codeaurora.org>

This patch moves the qcom,smd-rpm.txt to the correct location and splits
out the smd and rpm documentation.  In addition, a smd-rpm-regulator
document is added.

Signed-off-by: Andy Gross <agross@codeaurora.org>
---
 .../qcom,smd-rpm-regulator.txt}                    |   30 +++--------
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  |   57 ++++++++++++++++++++
 2 files changed, 65 insertions(+), 22 deletions(-)
 rename Documentation/devicetree/bindings/soc/{qcom,smd-rpm.txt => qcom/qcom,smd-rpm-regulator.txt} (75%)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt

diff --git a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
similarity index 75%
rename from Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
rename to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
index e27f5c4..7084474 100644
--- a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
@@ -1,27 +1,14 @@
-Qualcomm Resource Power Manager (RPM) over SMD
+QCOM SMD RPM REGULATOR
 
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
+The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
+Because SMD is used as the communication transport mechanism, the RPM resides as
+a subnode of the SMD.  As such, the SMD-RPM regulator requires that the SMD and
+RPM nodes be present.
 
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-msm8974"
+Please refer to the qcom,smd.txt for information pertaining to the SMD node.
+Please refer to the qcom,smd-rpm.txt for information regarding the RPM node.
 
-- qcom,smd-channels:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Shared Memory channel used for communication with the RPM
-
-= SUBDEVICES
-
-The RPM exposes resources to its subnodes. The below bindings specify the set
-of valid subnodes that can operate on these resources.
-
-== Regulators
+== Regulator
 
 Regulator nodes are identified by their compatible:
 
@@ -114,4 +101,3 @@ see regulator.txt.
 			};
 		};
 	};
-
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
new file mode 100644
index 0000000..003bedd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
@@ -0,0 +1,57 @@
+Qualcomm Resource Power Manager (RPM) over SMD
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+The SMD information for the RPM edge should be filled out.  See qcom,smd.txt for
+the required edge properties.  All SMD related properties will reside within the
+RPM node itself.
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes.  The rpm_requests node must be
+present and this subnode may contain children that designate regulator
+resources.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,rpm-msm8974"
+
+- qcom,smd-channels:
+	Usage: required
+	Value type: <string>
+	Definition: must be "rpm_requests"
+
+Please refer to qcom,smd-rpm-regulator.txt for information on the regulator
+subnodes that can exist under the rpm_requests.
+
+Example:
+
+	soc {
+		apcs: syscon at f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				...
+			};
+		};
+	};
+
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  reply	other threads:[~2015-09-24 19:18 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-24 19:18 [Patch v3 00/10] Add RPM/SMD Support for QCOM platforms Andy Gross
2015-09-24 19:18 ` Andy Gross [this message]
2015-09-25  3:19   ` [Patch v3 01/10] soc: qcom: documentation: Update SMD/RPM Docs Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 02/10] soc: qcom: smd-rpm: Add existing platform support Andy Gross
2015-09-24 19:18 ` [Patch v3 03/10] arm64: dts: qcom: Add MSM8916 SMEM nodes Andy Gross
2015-09-25  3:20   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 04/10] arm64: dts: qcom: Add RPM/SMD support on MSM8916 Andy Gross
2015-09-25  3:21   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 05/10] arm64: dts: Add PM8916 " Andy Gross
2015-09-25  3:22   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 06/10] regulators: qcom-smd: Add PM8916 support Andy Gross
2015-09-24 19:18 ` [Patch v3 07/10] arm: dts: Add APQ8084 SMEM nodes Andy Gross
2015-09-25  3:23   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 08/10] arm: dts: Add RPM/SMD support on APQ8084 Andy Gross
2015-09-25  3:24   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 09/10] arm: dts: Add support for PMA8084 " Andy Gross
2015-09-25  3:24   ` Bjorn Andersson
2015-09-24 19:18 ` [Patch v3 10/10] regulator: qcom-smd: Add support for PMA8084 Andy Gross
2015-09-25  3:28   ` Bjorn Andersson
2015-09-25 18:01 ` [Patch v3 00/10] Add RPM/SMD Support for QCOM platforms Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443122339-13917-2-git-send-email-agross@codeaurora.org \
    --to=agross@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).