From: shannon.zhao@linaro.org (Shannon Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/20] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register
Date: Thu, 24 Sep 2015 15:31:17 -0700 [thread overview]
Message-ID: <1443133885-3366-13-git-send-email-shannon.zhao@linaro.org> (raw)
In-Reply-To: <1443133885-3366-1-git-send-email-shannon.zhao@linaro.org>
Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use
reset_unknown for its reset handler. Add a new case to emulate writing
PMINTENSET or PMINTENCLR register.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
---
arch/arm64/kvm/sys_regs.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 98da5a2..e52325c 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -519,6 +519,18 @@ static bool access_pmu_regs(struct kvm_vcpu *vcpu,
vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
break;
}
+ case PMINTENSET_EL1: {
+ val = *vcpu_reg(vcpu, p->Rt);
+ vcpu_sys_reg(vcpu, r->reg) |= val;
+ vcpu_sys_reg(vcpu, PMINTENCLR_EL1) |= val;
+ break;
+ }
+ case PMINTENCLR_EL1: {
+ val = *vcpu_reg(vcpu, p->Rt);
+ vcpu_sys_reg(vcpu, r->reg) &= ~val;
+ vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
+ break;
+ }
case PMCR_EL0: {
/* Only update writeable bits of PMCR */
val = vcpu_sys_reg(vcpu, r->reg);
@@ -708,10 +720,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
/* PMINTENSET_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
- trap_raz_wi },
+ access_pmu_regs, reset_unknown, PMINTENSET_EL1 },
/* PMINTENCLR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
- trap_raz_wi },
+ access_pmu_regs, reset_unknown, PMINTENCLR_EL1 },
/* MAIR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
@@ -1022,6 +1034,18 @@ static bool access_pmu_cp15_regs(struct kvm_vcpu *vcpu,
vcpu_cp15(vcpu, c9_PMCNTENSET) &= ~val;
break;
}
+ case c9_PMINTENSET: {
+ val = *vcpu_reg(vcpu, p->Rt);
+ vcpu_cp15(vcpu, r->reg) |= val;
+ vcpu_cp15(vcpu, c9_PMINTENCLR) |= val;
+ break;
+ }
+ case c9_PMINTENCLR: {
+ val = *vcpu_reg(vcpu, p->Rt);
+ vcpu_cp15(vcpu, r->reg) &= ~val;
+ vcpu_cp15(vcpu, c9_PMINTENSET) &= ~val;
+ break;
+ }
case c9_PMCR: {
/* Only update writeable bits of PMCR */
val = vcpu_cp15(vcpu, r->reg);
@@ -1108,8 +1132,10 @@ static const struct sys_reg_desc cp15_regs[] = {
{ Op1( 0), CRn( 9), CRm(13), Op2( 2), access_pmu_cp15_regs,
reset_unknown_cp15, c9_PMXEVCNTR },
{ Op1( 0), CRn( 9), CRm(14), Op2( 0), trap_raz_wi },
- { Op1( 0), CRn( 9), CRm(14), Op2( 1), trap_raz_wi },
- { Op1( 0), CRn( 9), CRm(14), Op2( 2), trap_raz_wi },
+ { Op1( 0), CRn( 9), CRm(14), Op2( 1), access_pmu_cp15_regs,
+ reset_unknown_cp15, c9_PMINTENSET },
+ { Op1( 0), CRn( 9), CRm(14), Op2( 2), access_pmu_cp15_regs,
+ reset_unknown_cp15, c9_PMINTENCLR },
{ Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, c10_PRRR },
{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
--
2.1.4
next prev parent reply other threads:[~2015-09-24 22:31 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 22:31 [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 01/20] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 02/20] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 03/20] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-10-07 8:25 ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-10-16 5:35 ` Wei Huang
2015-10-21 6:27 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 05/20] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 06/20] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 07/20] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-10-16 6:08 ` Wei Huang
2015-10-21 6:32 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 08/20] KVM: ARM64: Add reset and access handlers for PMXEVTYPER register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 09/20] KVM: ARM64: Add reset and access handlers for PMXEVCNTR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 10/20] KVM: ARM64: Add reset and access handlers for PMCCNTR register Shannon Zhao
2015-10-16 15:06 ` Wei Huang
2015-10-21 6:48 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 11/20] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-09-24 22:31 ` Shannon Zhao [this message]
2015-09-24 22:31 ` [PATCH v3 13/20] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 14/20] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 15/20] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-10-16 15:25 ` Wei Huang
2015-10-21 7:02 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 16/20] KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 17/20] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-10-07 8:17 ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 18/20] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-10-16 15:28 ` Wei Huang
2015-09-24 22:31 ` [PATCH v3 19/20] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 20/20] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-10-16 4:55 ` [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Wei Huang
2015-10-16 17:01 ` Christopher Covington
2015-10-21 7:26 ` Shannon Zhao
2015-10-26 11:33 ` Christoffer Dall
2015-10-27 1:15 ` Shannon Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443133885-3366-13-git-send-email-shannon.zhao@linaro.org \
--to=shannon.zhao@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).