From mboxrd@z Thu Jan 1 00:00:00 1970 From: xerofoify@gmail.com (Nicholas Krause) Date: Tue, 29 Sep 2015 22:07:50 -0400 Subject: [PATCH RESENDv2] mach:-s3c64xx:Output trace information with WARN_ON if calls for setting up gpio board configuration fail in s3c64xx_i2s_cfg_gpio Message-ID: <1443578870-14534-1-git-send-email-xerofoify@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This fixes the function s3c64xx_i2c_cfg_gpio to log output to the kernel log buff with WARN_ON if any of the calls to either s3c_gpio_cfgpin_range or s3c_gpio_cfgpin fail as we cannot exit from s3c64xx_i2s_cfg_gpio if any of these calls fail due to other intended function work being required to complete. Therefore due to this output our failed calls by means of WARN_ON to the kernel log buffer for failed configuration of gpio devices using this driver file. v2:Fix Patch Wording as it was clearly confusing and incorrect Signed-off-by: Nicholas Krause --- arch/arm/mach-s3c64xx/dev-audio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index ff780a8..5e7538b 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -36,10 +36,10 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) base = S3C64XX_GPE(0); break; case 2: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5)); + WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5))); + WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5))); + WARN_ON(s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5))); + WARN_ON(s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));) return 0; default: printk(KERN_DEBUG "Invalid I2S Controller number: %d\n", @@ -47,7 +47,7 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) return -EINVAL; } - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); + WARN_ON(s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3))); return 0; } -- 2.1.4