From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings
Date: Wed, 30 Sep 2015 19:50:55 +0200 [thread overview]
Message-ID: <1443635458-8873-2-git-send-email-codekipper@gmail.com> (raw)
In-Reply-To: <1443635458-8873-1-git-send-email-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add devicetree bindings for the SPDIF transceiver found on
found on Allwinners A10, A20 and A31 SoCs.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
.../devicetree/bindings/sound/sunxi,spdif.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sunxi,spdif.txt
diff --git a/Documentation/devicetree/bindings/sound/sunxi,spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
new file mode 100644
index 0000000..1868722
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sunxi,spdif.txt
@@ -0,0 +1,49 @@
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+ - compatible : should be one of the following:
+ - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+ - "allwinner,sun7i-a20-spdif": for the Allwinner A20 SoC
+ - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "apb" clock for the spdif bus.
+ "audio" clock from the audio pll.
+ "spdif" clock for spdif controller.
+
+Optional:
+
+ - spdif-in : Enable block for capturing an SPDIF signal.
+
+ - spdif-out : Enable block for transmitting an SPDIF signal.
+
+Example:
+
+spdif: spdif at 01c21000 {
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&pll2 0>, <&spdif_clk>;
+ clock-names = "apb", "audio", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ spdif-in = "disabled";
+ spdif-out = "okay";
+ status = "okay";
+};
--
1.9.1
next prev parent reply other threads:[~2015-09-30 17:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 17:50 [PATCH v2 0/4] Add SPDIF support for Allwinner SoCs codekipper at gmail.com
2015-09-30 17:50 ` codekipper at gmail.com [this message]
2015-10-01 20:12 ` [PATCH v2 1/4] dt-bindings: add sunxi SPDIF transceiver bindings Maxime Ripard
2015-10-02 5:24 ` Code Kipper
2015-10-05 8:41 ` Maxime Ripard
2015-10-05 10:40 ` Code Kipper
2015-09-30 17:50 ` [PATCH v2 2/4] dt-binding: Add sunxi S/PDIF machine driver codekipper at gmail.com
2015-09-30 17:50 ` [PATCH v2 3/4] ASoC: sunxi: Add " codekipper at gmail.com
2015-09-30 17:50 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block codekipper at gmail.com
2015-09-30 18:26 ` kbuild test robot
2015-09-30 18:26 ` [PATCH] ASOC: sunxi: fix platform_no_drv_owner.cocci warnings kbuild test robot
2015-09-30 18:52 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block kbuild test robot
2015-09-30 18:52 ` [RFC PATCH] ASOC: sunxi: sun4i_snd_txctrl_on() can be static kbuild test robot
2015-10-01 20:11 ` [PATCH v2 4/4] ASOC: sunxi: Add support for the spdif block Maxime Ripard
2015-10-02 6:44 ` Code Kipper
2015-10-06 9:00 ` Maxime Ripard
2015-10-06 10:38 ` Code Kipper
2015-10-26 19:20 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443635458-8873-2-git-send-email-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).