From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] ARM: dts: rockchip: add rk3288-popmetal iodomains
Date: Wed, 30 Sep 2015 21:17:48 +0200 [thread overview]
Message-ID: <1443640670-21104-4-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1443640670-21104-1-git-send-email-heiko@sntech.de>
Add the iodomains node and reference the correct regulator for each
domain. This also includes adding the currently unused dvp regulators
and fixing up two regulators to follow the naming in the schematics.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3288-popmetal.dts | 55 ++++++++++++++++++++++++++++++++---
1 file changed, 51 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index b677611..65c4756 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -79,6 +79,22 @@
};
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc18_dvp>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -114,6 +130,31 @@
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc18_dvp: vcc18-dvp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc18-dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
@@ -321,22 +362,22 @@
};
};
- vcca_codec: LDO_REG8 {
+ vcca_33: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_codec";
+ regulator-name = "vcca_33";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
- vcc_wl: SWITCH_REG1 {
+ vccio_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_wl";
+ regulator-name = "vccio_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
@@ -412,6 +453,12 @@
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ir {
ir_int: ir-int {
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
--
2.5.3
next prev parent reply other threads:[~2015-09-30 19:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 19:17 [PATCH 0/5] ARM: dts: rockchip: some regulator updates for popmetal and firefly Heiko Stuebner
2015-09-30 19:17 ` [PATCH 1/5] ARM: dts: rockchip: add rk3288-popmetal board to dtb list Heiko Stuebner
2015-09-30 19:17 ` [PATCH 2/5] ARM: dts: rockchip: add rk3288-popmemtal mmc supplies Heiko Stuebner
2015-09-30 19:17 ` Heiko Stuebner [this message]
2015-09-30 19:17 ` [PATCH 4/5] ARM: dts: rockchip: fixup firefly " Heiko Stuebner
2015-09-30 19:17 ` [PATCH 5/5] ARM: dts: rockchip: add rk3288-firefly iodomains Heiko Stuebner
2015-10-06 8:27 ` [PATCH 0/5] ARM: dts: rockchip: some regulator updates for popmetal and firefly Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443640670-21104-4-git-send-email-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).