From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: dts: qcom: Add #power-domain-cells property
Date: Thu, 1 Oct 2015 14:56:02 +0530 [thread overview]
Message-ID: <1443691562-16963-1-git-send-email-rnayak@codeaurora.org> (raw)
clock controller nodes which also support power domains (gdscs') need
to have a #power-domain-cells property. Add these for gcc and mmcc
nodes of msm8974, gcc of apq8084 and msm8916.
Also update gcc and mmcc bindings for it.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
Andy, the rest of the power domain (gdsc) support patches are
pulled in by Stephen into clk-next. Can you please pull the dts
changes in for 4.4.
Documentation/devicetree/bindings/clock/qcom,gcc.txt | 4 ++++
Documentation/devicetree/bindings/clock/qcom,mmcc.txt | 4 ++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 ++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
5 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 54c23f3..152dfaa 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -18,10 +18,14 @@ Required properties :
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller at 900000 {
compatible = "qcom,gcc-msm8960";
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
index 29ebf84..34e7614 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
@@ -14,10 +14,14 @@ Required properties :
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller at 4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0554fbd..fcffeca 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -221,6 +221,7 @@
compatible = "qcom,gcc-apq8084";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ab8e572..ab8473b 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -228,6 +228,7 @@
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
@@ -240,6 +241,7 @@
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfd8c0000 0x6000>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5911de0..ac006e8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -99,6 +99,7 @@
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0x1800000 0x80000>;
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2015-10-01 9:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 9:26 Rajendra Nayak [this message]
2015-10-01 17:36 ` [PATCH] arm: dts: qcom: Add #power-domain-cells property Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443691562-16963-1-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).