From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Fri, 2 Oct 2015 16:59:46 +0200 Subject: [PATCH v7 1/5] Documentation: bindings: document the Berlin PWM driver In-Reply-To: <1443797990-10809-1-git-send-email-antoine.tenart@free-electrons.com> References: <1443797990-10809-1-git-send-email-antoine.tenart@free-electrons.com> Message-ID: <1443797990-10809-2-git-send-email-antoine.tenart@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Following the addition of a Berlin PWM driver, this patch adds the corresponding documentation. Signed-off-by: Antoine Tenart Acked-by: Sebastian Hesselbarth --- Documentation/devicetree/bindings/pwm/pwm-berlin.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-berlin.txt diff --git a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt new file mode 100644 index 000000000000..82cbe16fcbbc --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt @@ -0,0 +1,17 @@ +Berlin PWM controller + +Required properties: +- compatible: should be "marvell,berlin-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle to the input clock +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. + +Example: + +pwm: pwm at f7f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf7f20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; +} -- 2.6.0