From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 2 Oct 2015 15:20:56 -0700 Subject: [GIT PULL] Broadcom devicetree changes for v4.4 In-Reply-To: <1443824458-20799-1-git-send-email-f.fainelli@gmail.com> References: <1443824458-20799-1-git-send-email-f.fainelli@gmail.com> Message-ID: <1443824458-20799-2-git-send-email-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f: Linux 4.3-rc1 (2015-09-12 16:35:56 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.4/devicetree for you to fetch changes up to eef228e3191de0b62ef5913be216f25ba6b23a4c: ARM: dts: move aliases back to .dts in Cygnus (2015-09-24 18:30:10 -0700) ---------------------------------------------------------------- This pull requests contains the following Broadcom SoCs Device Tree changes: - Brian Norris documents the BCM7445 SoCs Power Management controllers and hardware and updates the reference BCM7445 Device Tree with these nodes - Florian Fainelli documents the BCM7xxx write-pairing feature in the top-level BCM7xxx binding document - Hauke Merthens enables the NAND controller for the Asus RT-AC87U and adds the GPIO pin controlling the USB power supply on Netgear R6250 - Jon Mason adds support for the NorthStar Plus SoC by providing a top-level binding document and the minimalist device tree skeleton for these SoCs - Rafal Milecki adds support for the Netgear R7000 (BCM5301x SoC) - Ray Jui provides a set of Cygnus DT changes that make the Device Tree clearer and more correct with respect to how the hardware is designed. He also enables the NAND controller on the bcm911360_entphn design, enables a bunch of peripherals on the bcm958305k evaluation board, and adds a skeleton .dtsi file for the touchscreen extansion board(s) ---------------------------------------------------------------- Brian Norris (2): Documentation: dt: brcmstb: add system PM bindings ARM: dts: brcmstb: add BCM7445 system PM DT nodes Florian Fainelli (1): Documentation: bindings: brcmstb: Document write-pairing Hauke Mehrtens (2): ARM: BCM5301X: add NAND flash chip description for Asus RT-AC87U ARM: BCM5301X: Netgear R6250 add USB GPIO Jon Mason (2): dt-bindings: Create Documentation for NSP DT bindings ARM: NSP: add minimal Northstar Plus device tree Rafa? Mi?ecki (1): ARM: BCM5301X: Add DT for Netgear R7000 Ray Jui (10): ARM: dts: consolidate aliases for Cygnus dt files ARM: dts: Use label for device nodes in Cygnus dts ARM: dts: Put Cygnus core components under core bus ARM: dts: Move all Cygnus peripherals into axi bus ARM: dts: Reorder Cygnus peripherals ARM: dts: Enable various peripherals on bcm958305k ARM: dts: Enable NAND support on bcm911360_entphn ARM: dts: enable touchscreen support on Cygnus ARM: dts: fix Cygnus nand device node ARM: dts: move aliases back to .dts in Cygnus .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 162 +++++++++- .../devicetree/bindings/arm/bcm/brcm,nsp.txt | 34 +++ arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/bcm-cygnus.dtsi | 334 +++++++++++---------- arch/arm/boot/dts/bcm-nsp.dtsi | 119 ++++++++ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 1 + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 106 +++++++ arch/arm/boot/dts/bcm7445.dtsi | 84 ++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 28 +- arch/arm/boot/dts/bcm911360k.dts | 9 +- arch/arm/boot/dts/bcm958300k.dts | 44 +-- arch/arm/boot/dts/bcm958305k.dts | 40 ++- arch/arm/boot/dts/bcm958625k.dts | 57 ++++ arch/arm/boot/dts/bcm9hmidc.dtsi | 42 +++ 15 files changed, 874 insertions(+), 200 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt create mode 100644 arch/arm/boot/dts/bcm-nsp.dtsi create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r7000.dts create mode 100644 arch/arm/boot/dts/bcm958625k.dts create mode 100644 arch/arm/boot/dts/bcm9hmidc.dtsi