From mboxrd@z Thu Jan 1 00:00:00 1970 From: thierry.reding@gmail.com (Thierry Reding) Date: Mon, 5 Oct 2015 14:47:13 +0200 Subject: [PATCH 2/6] ARM: s3c24xx: rx1950: Use PWM lookup table In-Reply-To: <1444049237-29878-1-git-send-email-thierry.reding@gmail.com> References: <1444049237-29878-1-git-send-email-thierry.reding@gmail.com> Message-ID: <1444049237-29878-3-git-send-email-thierry.reding@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Kukjin Kim Cc: Krzysztof Kozlowski Signed-off-by: Thierry Reding --- arch/arm/mach-s3c24xx/mach-rx1950.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 1d35ff375a01..774c982a7b7e 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { }; +static struct pwm_lookup rx1950_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000, + PWM_POLARITY_NORMAL), +}; + static struct pwm_device *lcd_pwm; static void rx1950_lcd_power(int enable) @@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness) } static struct platform_pwm_backlight_data rx1950_backlight_data = { - .pwm_id = 0, .max_brightness = 24, .dft_brightness = 4, - .pwm_period_ns = 48000, .enable_gpio = -1, .init = rx1950_backlight_init, .notify = rx1950_backlight_notify, @@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void) gpio_direction_output(S3C2410_GPA(4), 0); gpio_direction_output(S3C2410_GPJ(6), 0); + pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); i2c_register_board_info(0, rx1950_i2c_devices, -- 2.5.0