linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mw@semihalf.com (Marcin Wojtas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/8] mmc: sdhci-pxav3: enable proper resuming on Armada 38x SoC
Date: Tue,  6 Oct 2015 03:22:38 +0200	[thread overview]
Message-ID: <1444094562-31165-5-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1444094562-31165-1-git-send-email-mw@semihalf.com>

When resuming from suspend on Armada 38x SoC MBus windows have to be
re-configured and for that purpose mv_conf_mbus_windows function needed
rework. MBus windows register base address obtaining was moved to
armada_38x_quirks function in order to be kept in pxa global structure,
because it is used during a resume.

This commit fixes resuming from suspend by calling MBus windows
configuration routine and therefore enabling proper DMA operation.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 drivers/mmc/host/sdhci-pxav3.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index f5edf9d..3f71894 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -63,6 +63,7 @@ struct sdhci_pxa {
 	struct clk *clk_io;
 	u8	power_mode;
 	void __iomem *sdio3_conf_reg;
+	void __iomem *mbus_win_regs;
 };
 
 /*
@@ -81,30 +82,16 @@ struct sdhci_pxa {
 #define SDIO3_CONF_CLK_INV	BIT(0)
 #define SDIO3_CONF_SD_FB_CLK	BIT(2)
 
-static int mv_conf_mbus_windows(struct platform_device *pdev,
+static int mv_conf_mbus_windows(struct device *dev, void __iomem *regs,
 				const struct mbus_dram_target_info *dram)
 {
 	int i;
-	void __iomem *regs;
-	struct resource *res;
 
 	if (!dram) {
-		dev_err(&pdev->dev, "no mbus dram info\n");
-		return -EINVAL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot get mbus registers\n");
+		dev_err(dev, "no mbus dram info\n");
 		return -EINVAL;
 	}
 
-	regs = ioremap(res->start, resource_size(res));
-	if (!regs) {
-		dev_err(&pdev->dev, "cannot map mbus registers\n");
-		return -ENOMEM;
-	}
-
 	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
 		writel(0, regs + SDHCI_WINDOW_CTRL(i));
 		writel(0, regs + SDHCI_WINDOW_BASE(i));
@@ -122,8 +109,6 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
 		writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
 	}
 
-	iounmap(regs);
-
 	return 0;
 }
 
@@ -135,6 +120,14 @@ static int armada_38x_quirks(struct platform_device *pdev,
 	struct sdhci_pxa *pxa = pltfm_host->priv;
 	struct resource *res;
 
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mbus");
+	pxa->mbus_win_regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pxa->mbus_win_regs)) {
+		dev_err(mmc_dev(host->mmc),
+			"failed to obtain MBus windows register base\n");
+		return PTR_ERR(pxa->mbus_win_regs);
+	}
+
 	host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
@@ -403,7 +396,8 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 		ret = armada_38x_quirks(pdev, host);
 		if (ret < 0)
 			goto err_mbus_win;
-		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
+		ret = mv_conf_mbus_windows(&pdev->dev, pxa->mbus_win_regs,
+					   mv_mbus_dram_info());
 		if (ret < 0)
 			goto err_mbus_win;
 	}
@@ -520,6 +514,13 @@ static int sdhci_pxav3_resume(struct device *dev)
 {
 	int ret;
 	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
+	struct device_node *np = dev->of_node;
+
+	if (of_device_is_compatible(np, "marvell,armada-380-sdhci"))
+		ret = mv_conf_mbus_windows(dev, pxa->mbus_win_regs,
+					   mv_mbus_dram_info());
 
 	pm_runtime_get_sync(dev);
 	ret = sdhci_resume_host(host);
-- 
1.8.3.1

  parent reply	other threads:[~2015-10-06  1:22 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-06  1:22 [PATCH 0/8] Armada 38x SDHCI driver improvements Marcin Wojtas
2015-10-06  1:22 ` [PATCH 1/8] mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver Marcin Wojtas
2015-10-06 14:43   ` Gregory CLEMENT
2015-10-08 17:35   ` Ulf Hansson
2015-10-06  1:22 ` [PATCH 2/8] mmc: sdhci-pxav3: disable clock inversion for HS MMC cards Marcin Wojtas
2015-10-06 14:44   ` Gregory CLEMENT
2015-10-08 17:35   ` Ulf Hansson
2015-10-06  1:22 ` [PATCH 3/8] mmc: sdhci-pxav3: fix error handling of armada_38x_quirks Marcin Wojtas
2015-10-06 14:47   ` Gregory CLEMENT
2015-10-08 17:35   ` Ulf Hansson
2015-10-09  0:49     ` Marcin Wojtas
2015-10-06  1:22 ` Marcin Wojtas [this message]
2015-10-06 14:51   ` [PATCH 4/8] mmc: sdhci-pxav3: enable proper resuming on Armada 38x SoC Gregory CLEMENT
2015-10-06 15:08     ` Marcin Wojtas
2015-10-09  1:09   ` Jisheng Zhang
2015-10-09  9:48     ` Marcin Wojtas
2015-10-06  1:22 ` [PATCH 5/8] mmc: sdhci-pxav3: enable usage of DAT3 pin as HW card detect Marcin Wojtas
2015-10-06  1:22 ` [PATCH 6/8] ARM: mvebu: enable SDHCI card detection using DAT3 pin on A388-GP Marcin Wojtas
2015-10-06  3:31   ` Andrew Lunn
2015-10-06  7:02     ` Marcin Wojtas
2015-10-06 14:45       ` Andrew Lunn
2015-10-06 15:05         ` Marcin Wojtas
2015-10-06 16:23           ` Andrew Lunn
2015-10-06 15:05       ` Gregory CLEMENT
2015-10-06 15:35         ` Marcin Wojtas
2015-10-06 16:20           ` Andrew Lunn
2015-10-06  1:22 ` [PATCH 7/8] mmc: sdhci: add init_card callback to sdhci Marcin Wojtas
2015-10-06  1:22 ` [PATCH 8/8] mmc: sdhci-pxav3: enable modifying MMC_CARD bit during card initialization Marcin Wojtas
2015-10-06 14:43 ` [PATCH 0/8] Armada 38x SDHCI driver improvements Gregory CLEMENT
2015-10-06 15:48   ` Marcin Wojtas
2015-10-08 13:21     ` Marcin Wojtas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444094562-31165-5-git-send-email-mw@semihalf.com \
    --to=mw@semihalf.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).