From mboxrd@z Thu Jan 1 00:00:00 1970 From: jamesjj.liao@mediatek.com (James Liao) Date: Wed, 7 Oct 2015 17:14:39 +0800 Subject: [PATCH v2 1/3] dt-bindings: soc: Add clocks for Mediatek SCPSYS unit In-Reply-To: <1444209281-25536-1-git-send-email-jamesjj.liao@mediatek.com> References: <1444209281-25536-1-git-send-email-jamesjj.liao@mediatek.com> Message-ID: <1444209281-25536-2-git-send-email-jamesjj.liao@mediatek.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add clocks needed by Mediatek VENC and VENC_LT power domianis. These clocks were needed by accessing subsystem's registers, so they need to be enabled before power on these subsystems. Signed-off-by: James Liao --- Documentation/devicetree/bindings/soc/mediatek/scpsys.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index c051114..a6c8afc 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -17,9 +17,9 @@ Required properties: - reg: Address range of the SCPSYS unit - infracfg: must contain a phandle to the infracfg controller - clock, clock-names: clocks according to the common clock binding. - The clocks needed "mm" and "mfg". These are the - clocks which hardware needs to be enabled before - enabling certain power domains. + The clocks needed "mm", "mfg", "venc" and "venc_lt". + These are the clocks which hardware needs to be enabled + before enabling certain power domains. Example: @@ -30,7 +30,9 @@ Example: infracfg = <&infracfg>; clocks = <&clk26m>, <&topckgen CLK_TOP_MM_SEL>; - clock-names = "mfg", "mm"; + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mfg", "mm", "venc", "venc_lt"; }; Example consumer: -- 1.9.1