From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] iommu/arm-smmu: Add support for MSI on SMMUv3
Date: Thu, 8 Oct 2015 15:52:00 +0100 [thread overview]
Message-ID: <1444315920-11906-1-git-send-email-marc.zyngier@arm.com> (raw)
Despite being a platform device, the SMMUv3 is capable of signaling
interrupts using MSIs. Hook it into the platform MSI framework and
enjoy faults being reported in a new and exciting way.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
* From v2:
- MSI indexes as an enum
- Fixed stupid 16bit writes instead of 32bit
- Added devm callback to release MSIs on teardown
- Moved all the MSI setup to its own function
drivers/iommu/arm-smmu-v3.c | 108 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 99 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 5b11b77..3f7f096 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -26,6 +26,7 @@
#include <linux/iommu.h>
#include <linux/iopoll.h>
#include <linux/module.h>
+#include <linux/msi.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -403,6 +404,12 @@ enum pri_resp {
PRI_RESP_SUCC,
};
+enum msi_index {
+ EVTQ_MSI_INDEX,
+ GERROR_MSI_INDEX,
+ PRIQ_MSI_INDEX,
+};
+
struct arm_smmu_cmdq_ent {
/* Common fields */
u8 opcode;
@@ -2176,6 +2183,92 @@ static int arm_smmu_write_reg_sync(struct arm_smmu_device *smmu, u32 val,
1, ARM_SMMU_POLL_TIMEOUT_US);
}
+static void arm_smmu_free_msis(void *data)
+{
+ struct arm_smmu_device *smmu = data;
+ platform_msi_domain_free_irqs(smmu->dev);
+}
+
+static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+ struct device *dev = msi_desc_to_dev(desc);
+ struct arm_smmu_device *smmu = dev_get_drvdata(dev);
+ phys_addr_t cfg0_offset, cfg1_offset, cfg2_offset;
+ phys_addr_t doorbell;
+
+ switch (desc->platform.msi_index) {
+ case EVTQ_MSI_INDEX:
+ cfg0_offset = ARM_SMMU_EVTQ_IRQ_CFG0;
+ cfg1_offset = ARM_SMMU_EVTQ_IRQ_CFG1;
+ cfg2_offset = ARM_SMMU_EVTQ_IRQ_CFG2;
+ break;
+ case GERROR_MSI_INDEX:
+ cfg0_offset = ARM_SMMU_GERROR_IRQ_CFG0;
+ cfg1_offset = ARM_SMMU_GERROR_IRQ_CFG1;
+ cfg2_offset = ARM_SMMU_GERROR_IRQ_CFG2;
+ break;
+ case PRIQ_MSI_INDEX:
+ cfg0_offset = ARM_SMMU_PRIQ_IRQ_CFG0;
+ cfg1_offset = ARM_SMMU_PRIQ_IRQ_CFG1;
+ cfg2_offset = ARM_SMMU_PRIQ_IRQ_CFG2;
+ break;
+ default: /* Unknown */
+ return;
+ }
+
+ doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
+ doorbell &= MSI_CFG0_ADDR_MASK << MSI_CFG0_ADDR_SHIFT;
+
+ writeq_relaxed(doorbell, smmu->base + cfg0_offset);
+ writel_relaxed(msg->data, smmu->base + cfg1_offset);
+ writel_relaxed(MSI_CFG2_MEMATTR_DEVICE_nGnRE,
+ smmu->base + cfg2_offset);
+}
+
+static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
+{
+ /* Clear the MSI address regs */
+ writeq_relaxed(0, smmu->base + ARM_SMMU_GERROR_IRQ_CFG0);
+ writeq_relaxed(0, smmu->base + ARM_SMMU_EVTQ_IRQ_CFG0);
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ writeq_relaxed(0, smmu->base + ARM_SMMU_PRIQ_IRQ_CFG0);
+
+ /* Allocate MSIs for evtq, gerror and priq. Ignore cmdq */
+ if (smmu->features & ARM_SMMU_FEAT_MSI) {
+ struct msi_desc *desc;
+ int ret, nvecs = 2;
+
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ nvecs++;
+
+ ret = platform_msi_domain_alloc_irqs(smmu->dev, nvecs,
+ arm_smmu_write_msi_msg);
+ if (ret) {
+ dev_warn(smmu->dev, "failed to allocate MSIs\n");
+ return;
+ }
+
+ for_each_msi_entry(desc, smmu->dev) {
+ switch (desc->platform.msi_index) {
+ case EVTQ_MSI_INDEX:
+ smmu->evtq.q.irq = desc->irq;
+ break;
+ case GERROR_MSI_INDEX:
+ smmu->gerr_irq = desc->irq;
+ break;
+ case PRIQ_MSI_INDEX:
+ smmu->priq.q.irq = desc->irq;
+ break;
+ default: /* Unknown */
+ continue;
+ }
+ }
+
+ /* Add callback to free MSIs on teardown */
+ devm_add_action(smmu->dev, arm_smmu_free_msis, smmu);
+ }
+}
+
static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
{
int ret, irq;
@@ -2189,11 +2282,9 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
return ret;
}
- /* Clear the MSI address regs */
- writeq_relaxed(0, smmu->base + ARM_SMMU_GERROR_IRQ_CFG0);
- writeq_relaxed(0, smmu->base + ARM_SMMU_EVTQ_IRQ_CFG0);
+ arm_smmu_setup_msis(smmu);
- /* Request wired interrupt lines */
+ /* Request interrupt lines */
irq = smmu->evtq.q.irq;
if (irq) {
ret = devm_request_threaded_irq(smmu->dev, irq,
@@ -2222,8 +2313,6 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
}
if (smmu->features & ARM_SMMU_FEAT_PRI) {
- writeq_relaxed(0, smmu->base + ARM_SMMU_PRIQ_IRQ_CFG0);
-
irq = smmu->priq.q.irq;
if (irq) {
ret = devm_request_threaded_irq(smmu->dev, irq,
@@ -2421,7 +2510,7 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
if (reg & IDR0_SEV)
smmu->features |= ARM_SMMU_FEAT_SEV;
- if (reg & IDR0_MSI)
+ if (IS_ENABLED(CONFIG_GENERIC_MSI_IRQ_DOMAIN) && (reg & IDR0_MSI))
smmu->features |= ARM_SMMU_FEAT_MSI;
if (reg & IDR0_HYP)
@@ -2602,13 +2691,14 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
if (ret)
return ret;
+ /* Record our private device structure */
+ platform_set_drvdata(pdev, smmu);
+
/* Reset the device */
ret = arm_smmu_device_reset(smmu);
if (ret)
goto out_free_structures;
- /* Record our private device structure */
- platform_set_drvdata(pdev, smmu);
return 0;
out_free_structures:
--
2.1.4
next reply other threads:[~2015-10-08 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 14:52 Marc Zyngier [this message]
2015-10-13 15:41 ` [PATCH v3] iommu/arm-smmu: Add support for MSI on SMMUv3 Will Deacon
2015-10-13 17:04 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444315920-11906-1-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).