public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/7] ARM: dts: rockchip: add tuning related settings to veyron devices
Date: Mon, 12 Oct 2015 14:48:30 +0200	[thread overview]
Message-ID: <1444654110-32293-8-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1444654110-32293-1-git-send-email-heiko@sntech.de>

This allows the tuning code to run and use higher speeds on capable cards.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 7 ++++++-
 arch/arm/boot/dts/rk3288-veyron.dtsi       | 6 ++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index b5334ec..fec076e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -90,7 +90,7 @@
 	regulators {
 		vccio_sd: LDO_REG4 {
 			regulator-name = "vccio_sd";
-			regulator-min-microvolt = <3300000>;
+			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-state-mem {
 				regulator-off-in-suspend;
@@ -116,7 +116,12 @@
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+	rockchip,default-sample-phase = <90>;
 	num-slots = <1>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc33_sd>;
 	vqmmc-supply = <&vccio_sd>;
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 6820977..04c3d2a 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -196,7 +196,9 @@
 	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	rockchip,default-sample-phase = <158>;
 	disable-wp;
+	mmc-hs200-1_8v;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
 	num-slots = <1>;
@@ -413,6 +415,10 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc33_sys>;
 	vqmmc-supply = <&vcc18_wl>;
 };
-- 
2.6.1

  parent reply	other threads:[~2015-10-12 12:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-12 12:48 [PATCH v3 0/7] mmc: dw_mmc-rockchip: allow tuning using the clk-phase api Heiko Stuebner
2015-10-12 12:48 ` [PATCH v3 1/7] mmc: core: move ocr-bit to voltage translation into separate function Heiko Stuebner
2015-10-12 13:26   ` kbuild test robot
2015-10-12 13:44     ` Heiko Stübner
2015-10-12 16:00   ` [PATCH v3.1 " Heiko Stübner
2015-10-12 12:48 ` [PATCH v3 2/7] mmc: core: Add mmc_regulator_set_vqmmc() Heiko Stuebner
2015-10-12 12:48 ` [PATCH v3 3/7] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch Heiko Stuebner
2015-10-12 12:48 ` [PATCH v3 4/7] mmc: dw_mmc-rockchip: dt-binding: Add tuning related things Heiko Stuebner
2015-10-12 12:48 ` [PATCH v3 5/7] mmc: dw_mmc-rockchip: MMC tuning with the clock phase framework Heiko Stuebner
2015-10-12 12:48 ` [PATCH v3 6/7] ARM: dts: rockchip: Add drive/sample clocks for rk3288 dw_mmc devices Heiko Stuebner
2015-10-12 12:48 ` Heiko Stuebner [this message]
2015-10-16  8:25 ` [PATCH v3 0/7] mmc: dw_mmc-rockchip: allow tuning using the clk-phase api Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444654110-32293-8-git-send-email-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox