linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] mfd: axp20x: Add support for RSB based AXP223 PMIC
Date: Thu, 15 Oct 2015 00:32:19 +0800	[thread overview]
Message-ID: <1444840342-9233-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1444840342-9233-1-git-send-email-wens@csie.org>

The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
It is functionally identical to AXP221; only the regulator default
voltage/status and the external host interface are different.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/mfd/Kconfig        | 12 ++++++
 drivers/mfd/Makefile       |  1 +
 drivers/mfd/axp20x-core.c  |  2 +
 drivers/mfd/axp20x-rsb.c   | 93 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h |  1 +
 5 files changed, 109 insertions(+)
 create mode 100644 drivers/mfd/axp20x-rsb.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ba3feb3f2fc..6e5edb61d42e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -84,6 +84,7 @@ config MFD_BCM590XX
 config MFD_AXP20X
 	bool "X-Powers AXP series PMICs"
 	select MFD_AXP20X_I2C
+	select MFD_AXP20X_RSB
 
 config MFD_AXP20X_CORE
 	bool
@@ -102,6 +103,17 @@ config MFD_AXP20X_I2C
 	  components like regulators or the PEK (Power Enable Key) under the
 	  corresponding menus.
 
+config MFD_AXP20X_RSB
+	bool "X-Powers AXP series RSB PMICs"
+	select MFD_AXP20X_CORE
+	depends on SUNXI_RSB=y
+	help
+	  If you say Y here you get support for the X-Powers AXP series RSB
+	  based power management ICs (PMICs).
+	  This driver include only the core APIs. You have to select individual
+	  components like regulators or the PEK (Power Enable Key) under the
+	  corresponding menus.
+
 config MFD_CROS_EC
 	tristate "ChromeOS Embedded Controller"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ce3ad5fd4e2f..1eb278619dd6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 obj-$(CONFIG_MFD_AXP20X_CORE)	+= axp20x-core.o
 obj-$(CONFIG_MFD_AXP20X_I2C)	+= axp20x-i2c.o
+obj-$(CONFIG_MFD_AXP20X_RSB)	+= axp20x-rsb.o
 
 obj-$(CONFIG_MFD_LP3943)	+= lp3943.o
 obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o
diff --git a/drivers/mfd/axp20x-core.c b/drivers/mfd/axp20x-core.c
index dd33548d93c4..baecccb6d400 100644
--- a/drivers/mfd/axp20x-core.c
+++ b/drivers/mfd/axp20x-core.c
@@ -32,6 +32,7 @@ static const char * const axp20x_model_names[] = {
 	"AXP202",
 	"AXP209",
 	"AXP221",
+	"AXP223",
 	"AXP288",
 };
 
@@ -575,6 +576,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
 		axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
 		break;
 	case AXP221_ID:
+	case AXP223_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
 		axp20x->cells = axp22x_cells;
 		axp20x->regmap_cfg = &axp22x_regmap_config;
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
new file mode 100644
index 000000000000..5d053d177717
--- /dev/null
+++ b/drivers/mfd/axp20x-rsb.c
@@ -0,0 +1,93 @@
+/*
+ * axp20x-rsb.c - RSB driver for the X-Powers' Power Management ICs
+ *
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
+ *
+ * This driver supports the RSB variants.
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soc/sunxi/sunxi_rsb.h>
+
+static const struct of_device_id axp20x_sunxi_rsb_of_match[] = {
+	{ .compatible = "x-powers,axp223", .data = (void *) AXP223_ID },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, axp20x_sunxi_rsb_of_match);
+
+static int axp20x_sunxi_rsb_match_device(struct axp20x_dev *axp20x,
+					 struct device *dev)
+{
+	const struct of_device_id *of_id;
+
+	of_id = of_match_device(axp20x_sunxi_rsb_of_match, dev);
+	if (!of_id) {
+		dev_err(dev, "Unable to match OF ID\n");
+		return -ENODEV;
+	}
+	axp20x->variant = (long) of_id->data;
+
+	return axp20x_match_device(axp20x, dev);
+}
+
+static int axp20x_sunxi_rsb_probe(struct sunxi_rsb_device *rdev)
+{
+	struct axp20x_dev *axp20x;
+	int ret;
+
+	axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL);
+	if (!axp20x)
+		return -ENOMEM;
+
+	ret = axp20x_sunxi_rsb_match_device(axp20x, &rdev->dev);
+	if (ret)
+		return ret;
+
+	axp20x->dev = &rdev->dev;
+	axp20x->irq = rdev->irq;
+	sunxi_rsb_device_set_drvdata(rdev, axp20x);
+
+	axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg);
+	if (IS_ERR(axp20x->regmap)) {
+		ret = PTR_ERR(axp20x->regmap);
+		dev_err(&rdev->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	return axp20x_device_probe(axp20x);
+}
+
+static int axp20x_sunxi_rsb_remove(struct sunxi_rsb_device *rdev)
+{
+	struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev);
+
+	return axp20x_device_remove(axp20x);
+}
+
+static struct sunxi_rsb_driver axp20x_sunxi_rsb_driver = {
+	.driver = {
+		.name	= "axp20x-sunxi-rsb",
+		.of_match_table	= of_match_ptr(axp20x_sunxi_rsb_of_match),
+	},
+	.probe	= axp20x_sunxi_rsb_probe,
+	.remove	= axp20x_sunxi_rsb_remove,
+};
+module_sunxi_rsb_driver(axp20x_sunxi_rsb_driver);
+
+MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 908f97f6e2d7..fef8dea18e66 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -18,6 +18,7 @@ enum {
 	AXP202_ID,
 	AXP209_ID,
 	AXP221_ID,
+	AXP223_ID,
 	AXP288_ID,
 	NR_AXP20X_VARIANTS,
 };
-- 
2.6.1

  parent reply	other threads:[~2015-10-14 16:32 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-14 16:32 [PATCH 0/6] mfd: axp20x: Add support for RSB based AXP223 Chen-Yu Tsai
2015-10-14 16:32 ` [PATCH 1/6] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings Chen-Yu Tsai
2015-10-15 20:36   ` Maxime Ripard
2015-10-14 16:32 ` [PATCH 2/6] mfd: axp20x: Split the driver into core and i2c bits Chen-Yu Tsai
2015-10-14 20:22   ` kbuild test robot
2015-10-14 22:37   ` [linux-sunxi] " Julian Calaby
2015-10-15  7:39     ` Chen-Yu Tsai
2015-10-14 16:32 ` Chen-Yu Tsai [this message]
2015-10-14 17:47   ` [PATCH 3/6] mfd: axp20x: Add support for RSB based AXP223 PMIC kbuild test robot
2015-10-14 23:00   ` kbuild test robot
2015-10-16  6:41   ` Maxime Ripard
2015-10-16  6:46     ` [linux-sunxi] " Chen-Yu Tsai
2015-10-19  6:02       ` Maxime Ripard
2015-10-19  6:20         ` Chen-Yu Tsai
2015-10-19 18:48           ` Maxime Ripard
2015-10-20  4:04             ` Chen-Yu Tsai
2015-10-14 16:32 ` [PATCH 4/6] regulator: axp20x: Support new " Chen-Yu Tsai
2015-10-22 12:50   ` Mark Brown
2015-10-14 16:32 ` [PATCH 5/6] ARM: dts: sun8i: Add NMI interrupt controller node Chen-Yu Tsai
2015-10-16  6:44   ` Maxime Ripard
2015-10-14 16:32 ` [PATCH 6/6] ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444840342-9233-4-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).