From: bhupesh.sharma@freescale.com (Bhupesh Sharma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/12] arm64: Use generic Layerscape SoC family naming
Date: Thu, 15 Oct 2015 12:17:41 +0530 [thread overview]
Message-ID: <1444891672-32117-2-git-send-email-bhupesh.sharma@freescale.com> (raw)
In-Reply-To: <1444891672-32117-1-git-send-email-bhupesh.sharma@freescale.com>
Freescale will be a spinning-out a set of ARMv8 based SoCs which
will be based on a similar overall SoC architecture. So, this patch
converts the existing infrastructure in the arm64/dts, arm64/Kconfig
and arm64/configs to use the generic convention ARCH_LAYERSCAPE
in place of the more specific FSL_LS2085A, to save code duplication
later-on.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
---
Documentation/devicetree/bindings/arm/fsl.txt | 4 ++--
arch/arm64/Kconfig.platforms | 6 +++---
arch/arm64/boot/dts/freescale/Makefile | 2 +-
arch/arm64/configs/defconfig | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 2a3ba73..744b4de 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -128,8 +128,8 @@ Example:
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
-Freescale LS2085A SoC Device Tree Bindings
-------------------------------------------
+Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
+----------------------------------------------------------------
LS2085A ARMv8 based Simulator model
Required root node properties:
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 967571d..4043c35 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -29,10 +29,10 @@ config ARCH_EXYNOS7
help
This enables support for Samsung Exynos7 SoC family
-config ARCH_FSL_LS2085A
- bool "Freescale LS2085A SOC"
+config ARCH_LAYERSCAPE
+ bool "ARMv8 based Freescale Layerscape SoC family"
help
- This enables support for Freescale LS2085A SOC.
+ This enables support for the Freescale Layerscape SoC family.
config ARCH_HISI
bool "Hisilicon SoC Family"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 4f2de3e7..fc6fca3c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2085a-simu.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fc97b84..49f416a 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -34,7 +34,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_EXYNOS7=y
-CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_ROCKCHIP=y
--
1.7.9.5
next prev parent reply other threads:[~2015-10-15 6:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-15 6:47 [PATCH v3 00/12] ARM64: Update support for FSL's LS2085A SoC Bhupesh Sharma
2015-10-15 6:47 ` Bhupesh Sharma [this message]
2015-10-15 6:47 ` [PATCH v3 02/12] arm64: Rename FSL LS2085A SoC support code to LS2080A Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 03/12] Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 04/12] Documentation/dts: Move FSL board-specific bindings out of /powerpc Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 05/12] doc/bindings: Update Layerscape PCIe devicetree binding to be more flexible Bhupesh Sharma
2015-10-15 14:16 ` Arnd Bergmann
2015-10-15 20:11 ` Sharma Bhupesh
2015-10-28 3:57 ` Pratyush Anand
2015-10-15 6:47 ` [PATCH v3 06/12] doc/bindings: Update GPIO devicetree binding documentation for LS2080A Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 07/12] doc: DTS: Update DWC3 binding to provide reference to generic bindings Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 08/12] dts/ls2080a: Update DTSI to add support of various peripherals Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 09/12] dts/ls2080a: Update Simulator DTS " Bhupesh Sharma
2015-10-15 14:18 ` Arnd Bergmann
2015-10-15 20:01 ` Sharma Bhupesh
2015-10-15 6:47 ` [PATCH v3 10/12] dts/ls2080a: Remove text about writing to Free Software Foundation Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 11/12] dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards Bhupesh Sharma
2015-10-15 6:47 ` [PATCH v3 12/12] dts/Makefile: Add build support for LS2080a QDS & RDB board DTS Bhupesh Sharma
2015-10-15 14:19 ` Arnd Bergmann
2015-10-15 19:58 ` Sharma Bhupesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444891672-32117-2-git-send-email-bhupesh.sharma@freescale.com \
--to=bhupesh.sharma@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).