From mboxrd@z Thu Jan 1 00:00:00 1970 From: bhupesh.sharma@freescale.com (Bhupesh Sharma) Date: Thu, 15 Oct 2015 12:17:46 +0530 Subject: [PATCH v3 06/12] doc/bindings: Update GPIO devicetree binding documentation for LS2080A In-Reply-To: <1444891672-32117-1-git-send-email-bhupesh.sharma@freescale.com> References: <1444891672-32117-1-git-send-email-bhupesh.sharma@freescale.com> Message-ID: <1444891672-32117-7-git-send-email-bhupesh.sharma@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update the FSL, GPIO binding documentation to add support for GPIO controller found on Freescale's LS2080A platform. Signed-off-by: Liu Gang Signed-off-by: Bhupesh Sharma --- .../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 805ddcd..f2455c5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -1,9 +1,9 @@ -* Freescale MPC512x/MPC8xxx GPIO controller +* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller Required properties: - compatible : Should be "fsl,-gpio" The following s are known to be supported: - mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and -- 1.7.9.5