From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] ARM: dts: Add pinctrl node to STM32F429
Date: Sat, 17 Oct 2015 19:23:21 +0200 [thread overview]
Message-ID: <1445102604-11502-7-git-send-email-mcoquelin.stm32@gmail.com> (raw)
In-Reply-To: <1445102604-11502-1-git-send-email-mcoquelin.stm32@gmail.com>
The STM32F429 MCU has 11 GPIO banks, with 16 pins per bank.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 97 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d78a481..9e6e75c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -46,6 +46,7 @@
*/
#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
/ {
clocks {
@@ -168,6 +169,102 @@
status = "disabled";
};
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f429-pinctrl";
+ ranges = <0 0x40020000 0x3000>;
+ pins-are-numbered;
+
+ gpioa: gpio at 40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 256>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio at 40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 257>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio at 40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 258>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio at 40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 259>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio at 40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 260>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio at 40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 261>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio at 40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 262>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio at 40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 263>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio at 40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 264>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio at 40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 265>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio at 40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 266>;
+ st,bank-name = "GPIOK";
+ };
+ };
+
rcc: rcc at 40023810 {
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
--
1.9.1
next prev parent reply other threads:[~2015-10-17 17:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-17 17:23 [PATCH v2 0/9] Add STM32 pinctrl/GPIO driver Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 1/9] ARM: Kconfig: Introduce MACH_STM32F429 flag Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 2/9] Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 3/9] includes: dt-bindings: Add STM32F429 pinctrl " Maxime Coquelin
2015-10-20 10:06 ` Daniel Thompson
2015-10-20 16:32 ` Maxime Coquelin
2015-10-22 12:35 ` Linus Walleij
2015-11-06 12:57 ` Maxime Coquelin
2015-11-17 11:00 ` Linus Walleij
2015-11-30 15:55 ` Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 4/9] pinctrl: Add support STM32 MCUs Maxime Coquelin
2015-12-01 9:53 ` Maxime Coquelin
2015-12-10 17:08 ` Linus Walleij
2015-12-11 8:20 ` Patrice Chotard
2015-12-11 8:26 ` Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 5/9] ARM: mach-stm32: Select pinctrl Maxime Coquelin
2015-10-26 13:37 ` Linus Walleij
2015-10-17 17:23 ` Maxime Coquelin [this message]
2015-10-17 17:23 ` [PATCH v2 7/9] ARM: dts: Add USART1 pin config to STM32F429 boards Maxime Coquelin
2015-10-26 13:38 ` Linus Walleij
2015-10-17 17:23 ` [PATCH v2 8/9] ARM: dts: Add leds support to STM32F429 Discovery board Maxime Coquelin
2015-10-26 13:41 ` Linus Walleij
2015-10-27 20:31 ` Maxime Coquelin
2015-10-27 21:37 ` Andreas Färber
2015-10-27 21:46 ` Linus Walleij
2015-10-27 21:52 ` Andreas Färber
2015-10-28 8:09 ` Daniel Thompson
2015-10-28 14:24 ` Maxime Coquelin
2015-10-17 17:23 ` [PATCH v2 9/9] ARM: config: Enable GPIO Led driver in stm32_defconfig Maxime Coquelin
2015-10-26 13:42 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445102604-11502-7-git-send-email-mcoquelin.stm32@gmail.com \
--to=mcoquelin.stm32@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).