linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] arm/arm64: KVM: Clear map->active on pend/active clear
Date: Sat, 17 Oct 2015 22:30:21 +0200	[thread overview]
Message-ID: <1445113822-7831-3-git-send-email-christoffer.dall@linaro.org> (raw)
In-Reply-To: <1445113822-7831-1-git-send-email-christoffer.dall@linaro.org>

When a guest reboots or offlines/onlines CPUs, it is not uncommon for it
to clear the pending and active states of an interrupt through the
emulated VGIC distributor.  However, since we emulate an edge-triggered
based on a level-triggered device, the guest expects the timer interrupt
to hit even after clearing the pending state.

We currently do not signal the VGIC when the map->active field is true,
because it indicates that the guest has already been signalled of the
interrupt as required.  Normally this field is set to false when the
guest deactivates the virtual interrupt through the sync path.

We also need to catch the case where the guest deactivates the interrupt
through the emulated distributor, again allowing guests to boot even if
the original virtual timer signal hit before the guest's GIC
initialization sequence is run.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
 virt/kvm/arm/vgic.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index ea21bc2..58b1256 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -531,6 +531,34 @@ bool vgic_handle_set_pending_reg(struct kvm *kvm,
 	return false;
 }
 
+/*
+ * If a mapped interrupt's state has been modified by the guest such that it
+ * is no longer active or pending, without it have gone through the sync path,
+ * then the map->active field must be cleared so the interrupt can be taken
+ * again.
+ */
+static void vgic_handle_clear_mapped_irq(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct list_head *root;
+	struct irq_phys_map_entry *entry;
+	struct irq_phys_map *map;
+
+	rcu_read_lock();
+
+	/* Check for PPIs */
+	root = &vgic_cpu->irq_phys_map_list;
+	list_for_each_entry_rcu(entry, root, entry) {
+		map = &entry->map;
+
+		if (!vgic_dist_irq_is_pending(vcpu, map->virt_irq) &&
+		    !vgic_irq_is_active(vcpu, map->virt_irq))
+			map->active = false;
+	}
+
+	rcu_read_unlock();
+}
+
 bool vgic_handle_clear_pending_reg(struct kvm *kvm,
 				   struct kvm_exit_mmio *mmio,
 				   phys_addr_t offset, int vcpu_id)
@@ -561,6 +589,7 @@ bool vgic_handle_clear_pending_reg(struct kvm *kvm,
 					  vcpu_id, offset);
 		vgic_reg_access(mmio, reg, offset, mode);
 
+		vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
 		vgic_update_state(kvm);
 		return true;
 	}
@@ -598,6 +627,7 @@ bool vgic_handle_clear_active_reg(struct kvm *kvm,
 			ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT);
 
 	if (mmio->is_write) {
+		vgic_handle_clear_mapped_irq(kvm_get_vcpu(kvm, vcpu_id));
 		vgic_update_state(kvm);
 		return true;
 	}
@@ -1406,7 +1436,7 @@ static int vgic_sync_hwirq(struct kvm_vcpu *vcpu, struct vgic_lr vlr)
 		return 0;
 
 	map = vgic_irq_map_search(vcpu, vlr.irq);
-	BUG_ON(!map || !map->active);
+	BUG_ON(!map);
 
 	ret = irq_get_irqchip_state(map->irq,
 				    IRQCHIP_STATE_ACTIVE,
-- 
2.1.2.330.g565301e.dirty

  parent reply	other threads:[~2015-10-17 20:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-17 20:30 [PATCH 0/3] arm/arm64: KVM: arch timer boot fixes Christoffer Dall
2015-10-17 20:30 ` [PATCH 1/3] arm/arm64: KVM: Fix arch timer behavior for disabled interrupts Christoffer Dall
2015-10-17 21:50   ` Christoffer Dall
2015-10-19 13:07   ` Eric Auger
2015-10-19 13:14     ` Christoffer Dall
2015-10-19 13:27       ` Eric Auger
2015-10-19 13:38         ` Christoffer Dall
2015-10-17 20:30 ` Christoffer Dall [this message]
2015-10-19 15:32   ` [PATCH 2/3] arm/arm64: KVM: Clear map->active on pend/active clear Eric Auger
2015-10-19 15:39     ` Christoffer Dall
2015-10-19 15:45       ` Eric Auger
2015-10-17 20:30 ` [PATCH 3/3] arm/arm64: KVM: Fix disabled distributor operation Christoffer Dall
2015-10-20  9:08   ` Eric Auger
2015-10-20  9:44     ` Christoffer Dall
2015-10-20 17:44       ` Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445113822-7831-3-git-send-email-christoffer.dall@linaro.org \
    --to=christoffer.dall@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).