From mboxrd@z Thu Jan 1 00:00:00 1970 From: vz@mleia.com (Vladimir Zapolskiy) Date: Sun, 18 Oct 2015 00:35:52 +0300 Subject: [PATCH v2 3/8] arm: dts: lpc32xx: add reg property to cpu device node In-Reply-To: <1445117757-8073-1-git-send-email-vz@mleia.com> References: <1445117757-8073-1-git-send-email-vz@mleia.com> Message-ID: <1445117757-8073-4-git-send-email-vz@mleia.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org According to device tree bindings for ARM cpus cpu node must contain a reg property for enumeration scheme. The change adds reg = <0x0> indicating that the processor does not have CPU identification register and updates cell settings. Signed-off-by: Vladimir Zapolskiy --- Changes from v1 to v2: - new change, replaced v1 4/5 "arm: dts: lpc32xx: remove unneeded cell settings from cpus" arch/arm/boot/dts/lpc32xx.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 00570b3..fb0e9ae 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -18,12 +18,13 @@ interrupt-parent = <&mic>; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu at 0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; -- 2.1.4