From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/3] ARM: imx: device tree changes for 4.4
Date: Mon, 19 Oct 2015 23:18:56 +0800 [thread overview]
Message-ID: <1445267937-2952-2-git-send-email-shawnguo@kernel.org> (raw)
In-Reply-To: <1445267937-2952-1-git-send-email-shawnguo@kernel.org>
Hi arm-soc maintainers,
This is the i.MX device tree updates for 4.4. To resolve the dependency
between clock drivers and DTS files on some new clock ID additions, the
i.MX clock change set imx-clk-4.4 are pulled into the branch. The clock
changes has been pulled by Stephen and will be stable.
Shawn
The following changes since commit 84a87250ee4e4f7cf5865be9757e2ea758e5cae3:
clk: imx6: Add SPDIF_GCLK clock in clock tree (2015-10-12 21:55:59 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.4
for you to fetch changes up to 607e266c47ef552b6f87c7cf0ba7f3c28ea5af14:
ARM: dts: ls1021a: Add quirk for Erratum A009116 (2015-10-19 22:45:43 +0800)
----------------------------------------------------------------
The i.MX device tree changes for 4.4:
- Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
- Add a few low power mode related devices and touch controller for
i.MX6UL.
- Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
and eMMC5.0.
- i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
LCD, touch and wifi support, add new boards Nitrogen6_Lite and
Nitrogen6_Max.
- Enable touch screen and NAND Flash controller for a few Vybrid
devices.
- Some random and small updates on LS1021A and MXS support.
----------------------------------------------------------------
Adrian Alonso (2):
ARM: dts: imx7d-pinfunc: add gpio1 pad iomux settings
ARM: dts: imx: imx7d add iomuxc lpsr device node
Alison Wang (1):
ARM: ls1021a: Add dma-coherent property for eTSEC nodes
Anson Huang (3):
ARM: dts: imx6ul: add sram support for i.mx6ul
ARM: dts: imx6ul: add mmdc support for i.mx6ul
ARM: dts: imx6ul: add pm_power_off support
Fabio Estevam (4):
ARM: dts: imx6sl: Complete the dcp node
ARM: dts: imx7d: Add PWM support
ARM: dts: imx7d: Add USB support
ARM: dts: imx7d-sdb: Add USB support
Fugang Duan (2):
ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc
ARM: dts: imx7d-sdb: add fec1 and fec2 support
Gary Bisson (11):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
ARM: dts: imx6dql-nitrogen6x: add touchscreen support
ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
of: Add Boundary Devices Inc. vendor prefix
ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
Haibo Chen (3):
ARM: dts: imx7d-sdb: add eMMC5.0 support
ARM: dts: imx6ul.dtsi: add TSC support
ARM: dts: imx6ul-14x14-evk.dts: add tsc support
Horia Geant? (1):
ARM: dts: ls1021a: add crypto node
Laurent Pinchart (1):
ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property
Michael Opdenacker (1):
ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"
Rafa? Mi?ecki (1):
ARM: dts: imx: add "jedec,spi-nor" flash compatible binding
Rajesh Bhagat (1):
ARM: dts: ls1021a: Add quirk for Erratum A009116
Sanchayan Maity (1):
ARM: dts: vf500-colibri: Add device tree node for touchscreen support
Shawn Guo (1):
Merge tag 'imx-clk-4.4' into imx/dt
Shengjiu Wang (1):
ARM: dts: imx6: change the core clock of spdif
Stefan Agner (2):
ARM: dts: vf610twr: add NAND flash controller peripherial
ARM: dts: vf-colibri: enable NAND flash controller
Stefan Wahren (1):
ARM: mxs: enable ocotp for i.MX23 and i.MX28
Vladimir Zapolskiy (2):
ARM: dts: i.MX31: fix cpu compatible value
ARM: dts: i.MX35: fix cpu compatible value
Yuan Yao (1):
ARM: dts: Add node for ina220 on LS1021ATWR
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx23.dtsi | 6 +-
arch/arm/boot/dts/imx28-evk.dts | 2 +-
arch/arm/boot/dts/imx28-m28evk.dts | 2 +-
arch/arm/boot/dts/imx28.dtsi | 6 +-
arch/arm/boot/dts/imx31.dtsi | 2 +-
arch/arm/boot/dts/imx35.dtsi | 2 +-
arch/arm/boot/dts/imx50-evk.dts | 2 +-
arch/arm/boot/dts/imx53-smd.dts | 2 +-
arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 ++
arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +-
arch/arm/boot/dts/imx6dl-rex-basic.dts | 2 +-
arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +-
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +-
arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++
arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +-
arch/arm/boot/dts/imx6q-rex-pro.dts | 2 +-
arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +-
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 630 +++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 189 ++++-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 118 ++-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 12 +-
arch/arm/boot/dts/imx6sl-evk.dts | 2 +-
arch/arm/boot/dts/imx6sl.dtsi | 21 +-
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 +-
arch/arm/boot/dts/imx6sx-sdb.dts | 4 +-
arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +-
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 22 +
arch/arm/boot/dts/imx6ul.dtsi | 29 +
arch/arm/boot/dts/imx7d-pinfunc.h | 122 ++-
arch/arm/boot/dts/imx7d-sdb.dts | 100 ++-
arch/arm/boot/dts/imx7d.dtsi | 165 ++++
arch/arm/boot/dts/ls1021a-twr.dts | 13 +
arch/arm/boot/dts/ls1021a.dtsi | 44 ++
arch/arm/boot/dts/vf-colibri.dtsi | 39 +
arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 5 +
arch/arm/boot/dts/vf500-colibri.dtsi | 47 ++
arch/arm/boot/dts/vf610-twr.dts | 47 ++
arch/arm/boot/dts/vfxxx.dtsi | 11 +
49 files changed, 2744 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
next prev parent reply other threads:[~2015-10-19 15:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 15:18 [GIT PULL 1/3] ARM: imx: soc updates for 4.4 Shawn Guo
2015-10-19 15:18 ` Shawn Guo [this message]
2015-10-23 17:55 ` [GIT PULL 2/3] ARM: imx: device tree changes " Olof Johansson
2015-10-19 15:18 ` [GIT PULL 3/3] ARM: imx: defconfig updates " Shawn Guo
2015-10-23 17:56 ` Olof Johansson
2015-10-23 17:50 ` [GIT PULL 1/3] ARM: imx: soc " Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445267937-2952-2-git-send-email-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).