From mboxrd@z Thu Jan 1 00:00:00 1970 From: t.figa@samsung.com (Tomasz Figa) Date: Wed, 07 Aug 2013 17:18:10 +0200 Subject: [PATCH V3 6/7] ASoC: Samsung: wm8994: Register the osc clock. In-Reply-To: <1375866616-5541-7-git-send-email-padma.v@samsung.com> References: <1375866616-5541-1-git-send-email-padma.v@samsung.com> <1375866616-5541-7-git-send-email-padma.v@samsung.com> Message-ID: <1445367.zmBep3Ocuo@amdc1227> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wednesday 07 of August 2013 14:40:15 Padmavathi Venna wrote: > This patch registers the 16MHz oscillator clock as fixed clk. > > Signed-off-by: Padmavathi Venna > --- > sound/soc/samsung/smdk_wm8994.c | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/sound/soc/samsung/smdk_wm8994.c > b/sound/soc/samsung/smdk_wm8994.c index 581ea4a..a6edded 100644 > --- a/sound/soc/samsung/smdk_wm8994.c > +++ b/sound/soc/samsung/smdk_wm8994.c > @@ -9,6 +9,7 @@ > > #include "../codecs/wm8994.h" > #include > +#include > #include > #include > > @@ -37,6 +38,15 @@ > /* SMDK has a 16.934MHZ crystal attached to WM8994 */ > #define SMDK_WM8994_FREQ 16934000 > > +/* 16.9MHz fixed oscillator clock */ > +static void init_osc_clock(void) > +{ > + struct device_node *np; > + > + np = of_find_compatible_node(NULL, NULL, "osc3_clk16mhz"); > + of_fixed_clk_setup(np); > +} > + > static int smdk_hw_params(struct snd_pcm_substream *substream, > struct snd_pcm_hw_params *params) > { > @@ -173,6 +183,8 @@ static int smdk_audio_probe(struct platform_device > *pdev) smdk_dai[0].platform_of_node = smdk_dai[0].cpu_of_node; > } > > + init_osc_clock(); > + > ret = snd_soc_register_card(card); > > if (ret) I don't think this patch is needed at all. You can use generic fixed rate clock bindings[1] to define a fixed rate clock using device tree. Best regards, Tomasz [1] - Documentation/devicetree/bindings/clock/fixed-clock.txt