From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Wed, 21 Oct 2015 10:29:00 +0200 Subject: [PATCH v4 1/5] mtd: pxa3xx: prepare allowing compile test In-Reply-To: <1445416144-9194-1-git-send-email-antoine.tenart@free-electrons.com> References: <1445416144-9194-1-git-send-email-antoine.tenart@free-electrons.com> Message-ID: <1445416144-9194-2-git-send-email-antoine.tenart@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Using readsl() result in a build error on i386. Fix this by using ioread32_rep() instead, to allow compile test the pxa3xx nand driver later. Suggested-by: Arnd Bergmann Signed-off-by: Antoine Tenart --- drivers/mtd/nand/pxa3xx_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 77b3206aef01..91605c1ee169 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -532,7 +532,7 @@ static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) * the polling on the last read. */ while (len > 8) { - readsl(info->mmio_base + NDDB, data, 8); + ioread32_rep(info->mmio_base + NDDB, data, 8); ret = readl_relaxed_poll_timeout(info->mmio_base + NDSR, val, val & NDSR_RDDREQ, 1000, 5000); @@ -547,7 +547,7 @@ static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) } } - readsl(info->mmio_base + NDDB, data, len); + ioread32_rep(info->mmio_base + NDDB, data, len); } static void handle_data_pio(struct pxa3xx_nand_info *info) -- 2.6.2