From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 21 Oct 2015 22:52:55 +0200 Subject: [PATCH 02/13] ARM: sun5i: Add audio PLL In-Reply-To: <1445460786-18280-1-git-send-email-maxime.ripard@free-electrons.com> References: <1445460786-18280-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1445460786-18280-3-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The A13 uses the PLL2 as the audio PLL, which is the parent of all the other audio clocks in the system (i2s, codec, etc.). However, it has a different divider configuration than the A10, hence the difference compatible. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 9ffee9bb70a7..9b03eb95a390 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -102,6 +102,15 @@ clock-output-names = "pll1"; }; + pll2: clk at 01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk at 01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; -- 2.6.2