linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64/efi: move arm64 specific stub C code to libstub
Date: Fri, 23 Oct 2015 16:48:14 +0200	[thread overview]
Message-ID: <1445611694-31838-1-git-send-email-ard.biesheuvel@linaro.org> (raw)

Now that we added special handling to the C files in libstub, move
the one remaining arm64 specific EFI stub C file to libstub as
well, so that it gets the same treatment. This should prevent future
changes from resulting in binaries that may execute incorrectly in
UEFI context.

With efi-entry.S the only remaining EFI stub source file under
arch/arm64, we can also simplify the Makefile logic somewhat.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---

I would like to suggest that this be taken on top of the stuff that is
queued for 4.4 at the moment (if it is not too late already).

 arch/arm64/kernel/Makefile                                                | 9 ++-------
 drivers/firmware/efi/libstub/Makefile                                     | 3 +++
 arch/arm64/kernel/efi-stub.c => drivers/firmware/efi/libstub/arm64-stub.c | 0
 3 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 1b6bda2ff102..474691f8b13a 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -4,11 +4,8 @@
 
 CPPFLAGS_vmlinux.lds	:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 AFLAGS_head.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
-CFLAGS_efi-stub.o 	:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 CFLAGS_armv8_deprecated.o := -I$(src)
 
-KASAN_SANITIZE_efi-stub.o	:= n
-
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
 CFLAGS_REMOVE_return_address.o = -pg
@@ -22,9 +19,7 @@ arm64-obj-y		:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   cpufeature.o alternative.o cacheinfo.o		\
 			   smp.o smp_spin_table.o topology.o
 
-stub-obj				:= efi-stub.o efi-entry.o
-extra-y					:= $(stub-obj)
-stub-obj				:= $(patsubst %.o,%.stub.o,$(stub-obj))
+extra-$(CONFIG_EFI)			:= efi-entry.o
 
 OBJCOPYFLAGS := --prefix-symbols=__efistub_
 $(obj)/%.stub.o: $(obj)/%.o FORCE
@@ -42,7 +37,7 @@ arm64-obj-$(CONFIG_CPU_PM)		+= sleep.o suspend.o
 arm64-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 arm64-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 arm64-obj-$(CONFIG_KGDB)		+= kgdb.o
-arm64-obj-$(CONFIG_EFI)			+= efi.o $(stub-obj)
+arm64-obj-$(CONFIG_EFI)			+= efi.o efi-entry.stub.o
 arm64-obj-$(CONFIG_PCI)			+= pci.o
 arm64-obj-$(CONFIG_ARMV8_DEPRECATED)	+= armv8_deprecated.o
 arm64-obj-$(CONFIG_ACPI)		+= acpi.o
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index bca9a76cbd33..92ae557abbbc 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -34,6 +34,9 @@ $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
 lib-$(CONFIG_EFI_ARMSTUB)	+= arm-stub.o fdt.o string.o \
 				   $(patsubst %.c,lib-%.o,$(arm-deps))
 
+lib-$(CONFIG_ARM64)		+= arm64-stub.o
+CFLAGS_arm64-stub.o 		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+
 #
 # arm64 puts the stub in the kernel proper, which will unnecessarily retain all
 # code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
diff --git a/arch/arm64/kernel/efi-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
similarity index 100%
rename from arch/arm64/kernel/efi-stub.c
rename to drivers/firmware/efi/libstub/arm64-stub.c
-- 
2.1.4

             reply	other threads:[~2015-10-23 14:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23 14:48 Ard Biesheuvel [this message]
2015-10-26 21:11 ` [PATCH] arm64/efi: move arm64 specific stub C code to libstub Matt Fleming
2015-10-27  2:10   ` Ard Biesheuvel
2015-10-27 21:07     ` Matt Fleming
2015-10-29 18:39 ` Catalin Marinas
2015-10-30 11:57   ` Ard Biesheuvel
2015-10-30 15:43     ` Catalin Marinas
2015-10-30 15:40 ` Jeremy Linton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445611694-31838-1-git-send-email-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).