From: German.Rivera@freescale.com (J. German Rivera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: Added syscon-reboot node for FSL's LS2085A SoC
Date: Fri, 23 Oct 2015 20:31:20 -0500 [thread overview]
Message-ID: <1445650280-9966-1-git-send-email-German.Rivera@freescale.com> (raw)
Added sys-reboot node to the FSL's LS2085A SoC DT to leverage
the ARM-generic reboot mechanism for this SoC. This mechanism
is enabled through CONFIG_POWER_RESET_SYSCON.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
---
arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
index e281ceb..6f82163 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
@@ -131,6 +131,18 @@
interrupts = <1 9 0x4>;
};
+ rst_ccsr: rstccsr at 1E60000 {
+ compatible = "syscon";
+ reg = <0x0 0x1E60000 0x0 0x10000>;
+ };
+
+ reboot at 65024000 {
+ compatible ="syscon-reboot";
+ regmap = <&rst_ccsr>;
+ offset = <0x0>;
+ mask = <0x2>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
--
2.3.3
next reply other threads:[~2015-10-24 1:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-24 1:31 J. German Rivera [this message]
2015-10-27 16:31 ` [PATCH] arm64: dts: Added syscon-reboot node for FSL's LS2085A SoC Stuart Yoder
2015-10-27 16:34 ` Mark Rutland
2015-10-27 18:25 ` Stuart Yoder
2015-10-30 13:36 ` Arnd Bergmann
2015-10-30 16:15 ` Stuart Yoder
2015-10-30 14:32 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445650280-9966-1-git-send-email-German.Rivera@freescale.com \
--to=german.rivera@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).