From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/11] clk: divider: add CLK_DIVIDER_READ_ONLY flag
Date: Wed, 07 May 2014 23:10:22 +0200 [thread overview]
Message-ID: <1445808.WceTxW3oRk@diego> (raw)
In-Reply-To: <3477211.Gkyeur83TV@diego>
Similar to muxes which already have a read-only flag there sometimes
exist dividers which should not be changed by the clock framework
but whose value still should be readable.
Therefore add a READ_ONLY flag similar to the mux-one to clk-divider
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/clk/clk-divider.c | 10 +++++++++-
include/linux/clk-provider.h | 4 ++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index b3c8396..c9343f5 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -361,6 +361,11 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
+const struct clk_ops clk_divider_ro_ops = {
+ .recalc_rate = clk_divider_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
+
static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -386,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name,
}
init.name = name;
- init.ops = &clk_divider_ops;
+ if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+ init.ops = &clk_divider_ro_ops;
+ else
+ init.ops = &clk_divider_ops;
init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 59e2eb5..9c2cf89 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -314,6 +314,8 @@ struct clk_div_table {
* updated to indicate changing divider bits.
* CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
* to the closest integer instead of the up one.
+ * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
+ * not be changed by the clock framework.
*/
struct clk_divider {
struct clk_hw hw;
@@ -330,8 +332,10 @@ struct clk_divider {
#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
#define CLK_DIVIDER_HIWORD_MASK BIT(3)
#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
+#define CLK_DIVIDER_READ_ONLY BIT(4)
extern const struct clk_ops clk_divider_ops;
+extern const struct clk_ops clk_divider_ro_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
--
1.9.0
next prev parent reply other threads:[~2014-05-07 21:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-07 21:09 [PATCH v2 00/11] Add real clock support for Rockchip's RK3188 Heiko Stübner
2014-05-07 21:10 ` Heiko Stübner [this message]
2014-05-16 23:43 ` [PATCH v2 01/11] clk: divider: add CLK_DIVIDER_READ_ONLY flag Tomasz Figa
2014-05-07 21:11 ` [PATCH v2 02/11] clk: rockchip: add basic infrastructure Heiko Stübner
2014-05-07 21:12 ` [PATCH v2 03/11] clk: rockchip: add clock type for pll clocks and pll used on rk3066 Heiko Stübner
2014-05-07 21:12 ` [PATCH v2 04/11] clk: rockchip: add special cpu clock type Heiko Stübner
2014-05-07 21:13 ` [PATCH v2 05/11] clk: rockchip: add reset controller Heiko Stübner
2014-05-07 21:14 ` [PATCH v2 06/11] dt-bindings: add documentation for rk3188 clock and reset unit Heiko Stübner
2014-05-07 21:14 ` [PATCH v2 07/11] clk: rockchip: add clock driver for rk3188 clocks Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 08/11] ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 09/11] ARM: dts: rk3188: add cru node and update device clocks to use it Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 10/11] ARM: dts: rockchip: move rk3188 core input clocks into main dtsi Heiko Stübner
2014-05-07 21:16 ` [PATCH v2 11/11] ARM: dts: rockchip: remove the now obsolete rk3188-clocks.dtsi Heiko Stübner
2014-05-19 10:09 ` [PATCH v2 00/11] Add real clock support for Rockchip's RK3188 Max Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445808.WceTxW3oRk@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).