[PATCH 1/3] dt-bindings: add document of mediatek efuse driver

andrew-ct.chen at mediatek.com
2015-10-16T08:39:09Z

From: Andrew-CT Chen <andrew-ct.chen@mediatek.com>

Add Mediatek MT8173 EFUSE Devicetree binding file

Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
---
.../devicetree/bindings/nvmem/mtk-efuse.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/mtk-efuse.txt

diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
new file mode 100644
index 0000000..92edc3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
@@ -0,0 +1,36 @@
+= Mediatek MTK-EFUSE device tree bindings =
+
+This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
+
+Required properties:
+- compatible: should be "mediatek,mt8173-efuse" or "mediatek,mt8135-efuse"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of MTK-EFUSE, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ efuse: efuse at 10206000 {
+ compatible = "mediatek,mt8173-efuse";
+ reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ thermal_calibration: calib at 528 {
+ reg = <0x528 0xc>;
+ };
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+ thermal {
+ ...
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration";
+ };
--
1.9.1