* [PATCH] ARM: dts: sun4i: inet9f-rev03: Add support for game buttons / joysticks
2015-11-03 15:51 [PATCH 0/1] ARM: dts: sun4i: inet9f-rev03: Add support for game buttons / Hans de Goede
@ 2015-11-03 15:51 ` Hans de Goede
2015-11-04 21:54 ` Maxime Ripard
0 siblings, 1 reply; 3+ messages in thread
From: Hans de Goede @ 2015-11-03 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The inet9f-rev03 tablet has multiple fire-buttons / direction controls,
add support for these using the same axis mapping as ps2 compatible game
controllers with the same stick / button layout use.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Do not include dt-bindings/input/evdev.h, as the necessary evdev codes
have been added to dt-bindings/input/input.h instead
---
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 164 +++++++++++++++++++++++++++
1 file changed, 164 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 2fffc04..ca49b0d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -59,6 +59,159 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ gpio_keys {
+ compatible = "gpio-keys-polled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_inet9f>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button at 0 {
+ label = "Left Joystick Left";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ };
+
+ button at 1 {
+ label = "Left Joystick Right";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ };
+
+ button at 2 {
+ label = "Left Joystick Up";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ };
+
+ button at 3 {
+ label = "Left Joystick Down";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ };
+
+ button at 4 {
+ label = "Right Joystick Left";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ };
+
+ button at 5 {
+ label = "Right Joystick Right";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ };
+
+ button at 6 {
+ label = "Right Joystick Up";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ };
+
+ button at 7 {
+ label = "Right Joystick Down";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ };
+
+ button at 8 {
+ label = "DPad Left";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+ };
+
+ button at 9 {
+ label = "DPad Right";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+ };
+
+ button at 10 {
+ label = "DPad Up";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+ };
+
+ button at 11 {
+ label = "DPad Down";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ };
+
+ button at 12 {
+ label = "Button X";
+ linux,code = <BTN_X>;
+ gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+ };
+
+ button at 13 {
+ label = "Button Y";
+ linux,code = <BTN_Y>;
+ gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+ };
+
+ button at 14 {
+ label = "Button A";
+ linux,code = <BTN_A>;
+ gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ };
+
+ button at 15 {
+ label = "Button B";
+ linux,code = <BTN_B>;
+ gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+ };
+
+ button at 16 {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ };
+
+ button at 17 {
+ label = "Start Button";
+ linux,code = <BTN_START>;
+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ };
+
+ button at 18 {
+ label = "Top Left Button";
+ linux,code = <BTN_TL>;
+ gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+ };
+
+ button at 19 {
+ label = "Top Right Button";
+ linux,code = <BTN_TR>;
+ gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+ };
+ };
};
&cpu0 {
@@ -157,6 +310,17 @@
};
&pio {
+ key_pins_inet9f: key_pins at 0 {
+ allwinner,pins = "PA0", "PA1", "PA3", "PA4",
+ "PA5", "PA6", "PA8", "PA9",
+ "PA11", "PA12", "PA13",
+ "PA14", "PA15", "PA16", "PA17",
+ "PH22", "PH23", "PH24", "PH25", "PH26";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin at 0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
--
2.5.0
^ permalink raw reply related [flat|nested] 3+ messages in thread