From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 1/8] vfio: platform: introduce vfio-platform-base module
Date: Tue, 3 Nov 2015 18:12:12 +0000 [thread overview]
Message-ID: <1446574339-1843-2-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1446574339-1843-1-git-send-email-eric.auger@linaro.org>
To prepare for vfio platform reset rework let's build
vfio_platform_common.c and vfio_platform_irq.c in a separate
module from vfio-platform and vfio-amba. This makes possible
to have separate module inits and works around a race between
platform driver init and vfio reset module init: that way we
make sure symbols exported by base are available when vfio-platform
driver gets probed.
The open/release being implemented in the base module, the ref
count is applied to the parent module instead.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
v3 -> v4:
- add Arnd R-b
v3: creation
---
drivers/vfio/platform/Makefile | 6 ++++--
drivers/vfio/platform/vfio_amba.c | 1 +
drivers/vfio/platform/vfio_platform.c | 1 +
drivers/vfio/platform/vfio_platform_common.c | 13 +++++++++++--
drivers/vfio/platform/vfio_platform_private.h | 1 +
5 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/vfio/platform/Makefile b/drivers/vfio/platform/Makefile
index 9ce8afe..41a6224 100644
--- a/drivers/vfio/platform/Makefile
+++ b/drivers/vfio/platform/Makefile
@@ -1,10 +1,12 @@
-
-vfio-platform-y := vfio_platform.o vfio_platform_common.o vfio_platform_irq.o
+vfio-platform-base-y := vfio_platform_common.o vfio_platform_irq.o
+vfio-platform-y := vfio_platform.o
obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform.o
+obj-$(CONFIG_VFIO_PLATFORM) += vfio-platform-base.o
obj-$(CONFIG_VFIO_PLATFORM) += reset/
vfio-amba-y := vfio_amba.o
obj-$(CONFIG_VFIO_AMBA) += vfio-amba.o
+obj-$(CONFIG_VFIO_AMBA) += vfio-platform-base.o
obj-$(CONFIG_VFIO_AMBA) += reset/
diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
index ff0331f..a66479b 100644
--- a/drivers/vfio/platform/vfio_amba.c
+++ b/drivers/vfio/platform/vfio_amba.c
@@ -67,6 +67,7 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
vdev->flags = VFIO_DEVICE_FLAGS_AMBA;
vdev->get_resource = get_amba_resource;
vdev->get_irq = get_amba_irq;
+ vdev->parent_module = THIS_MODULE;
ret = vfio_platform_probe_common(vdev, &adev->dev);
if (ret) {
diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
index cef645c..f1625dc 100644
--- a/drivers/vfio/platform/vfio_platform.c
+++ b/drivers/vfio/platform/vfio_platform.c
@@ -65,6 +65,7 @@ static int vfio_platform_probe(struct platform_device *pdev)
vdev->flags = VFIO_DEVICE_FLAGS_PLATFORM;
vdev->get_resource = get_platform_resource;
vdev->get_irq = get_platform_irq;
+ vdev->parent_module = THIS_MODULE;
ret = vfio_platform_probe_common(vdev, &pdev->dev);
if (ret)
diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index e43efb5..184e9d2 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -23,6 +23,10 @@
#include "vfio_platform_private.h"
+#define DRIVER_VERSION "0.10"
+#define DRIVER_AUTHOR "Antonios Motakis <a.motakis@virtualopensystems.com>"
+#define DRIVER_DESC "VFIO platform base module"
+
static DEFINE_MUTEX(driver_lock);
static const struct vfio_platform_reset_combo reset_lookup_table[] = {
@@ -146,7 +150,7 @@ static void vfio_platform_release(void *device_data)
mutex_unlock(&driver_lock);
- module_put(THIS_MODULE);
+ module_put(vdev->parent_module);
}
static int vfio_platform_open(void *device_data)
@@ -154,7 +158,7 @@ static int vfio_platform_open(void *device_data)
struct vfio_platform_device *vdev = device_data;
int ret;
- if (!try_module_get(THIS_MODULE))
+ if (!try_module_get(vdev->parent_module))
return -ENODEV;
mutex_lock(&driver_lock);
@@ -573,3 +577,8 @@ struct vfio_platform_device *vfio_platform_remove_common(struct device *dev)
return vdev;
}
EXPORT_SYMBOL_GPL(vfio_platform_remove_common);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
index 1c9b3d5..7128690 100644
--- a/drivers/vfio/platform/vfio_platform_private.h
+++ b/drivers/vfio/platform/vfio_platform_private.h
@@ -56,6 +56,7 @@ struct vfio_platform_device {
u32 num_irqs;
int refcnt;
struct mutex igate;
+ struct module *parent_module;
/*
* These fields should be filled by the bus specific binder
--
1.9.1
next prev parent reply other threads:[~2015-11-03 18:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 18:12 [PATCH v6 0/8] VFIO platform reset module rework Eric Auger
2015-11-03 18:12 ` Eric Auger [this message]
2015-11-03 18:12 ` [PATCH v6 2/8] vfio: platform: add capability to register a reset function Eric Auger
2015-11-03 18:12 ` [PATCH v6 3/8] vfio: platform: introduce module_vfio_reset_handler macro Eric Auger
2015-11-03 18:12 ` [PATCH v6 4/8] vfio: platform: reset: calxedaxgmac: add reset function registration Eric Auger
2015-11-03 18:12 ` [PATCH v6 5/8] vfio: platform: add compat in vfio_platform_device Eric Auger
2015-11-03 18:12 ` [PATCH v6 6/8] vfio: platform: use list of registered reset function Eric Auger
2015-11-03 18:12 ` [PATCH v6 7/8] vfio: platform: add dev_info on device reset Eric Auger
2015-11-03 18:12 ` [PATCH v6 8/8] vfio: platform: reset: calxedaxgmac: fix ioaddr leak Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446574339-1843-2-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).