From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM/arm64: KVM: test properly for a PTE's uncachedness
Date: Fri, 6 Nov 2015 12:43:08 +0100 [thread overview]
Message-ID: <1446810188-13727-1-git-send-email-ard.biesheuvel@linaro.org> (raw)
The open coded tests for checking whether a PTE maps a page as
uncached use a flawed 'pte_val(xxx) & CONST != CONST' pattern,
which is not guaranteed to work since the type of a mapping is an
index into the MAIR table, not a set of mutually exclusive bits.
Considering that, on arm64, the S2 type definitions use the following
MAIR indexes
#define MT_S2_NORMAL 0xf
#define MT_S2_DEVICE_nGnRE 0x1
we have been getting lucky merely because the S2 device mappings also
have the PTE_UXN bit set, which means that a device PTE still does not
equal a normal PTE after masking with the former type.
Instead, implement proper checking against the MAIR indexes that are
known to define uncached memory attributes.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/include/asm/kvm_mmu.h | 11 +++++++++++
arch/arm/kvm/mmu.c | 5 ++---
arch/arm64/include/asm/kvm_mmu.h | 12 ++++++++++++
3 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 405aa1883307..422973835d41 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -279,6 +279,17 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
pgd_t *merged_hyp_pgd,
unsigned long hyp_idmap_start) { }
+static inline bool __kvm_pte_is_uncached(pte_t pte)
+{
+ switch (pte_val(pte) & L_PTE_MT_MASK) {
+ case L_PTE_MT_UNCACHED:
+ case L_PTE_MT_BUFFERABLE:
+ case L_PTE_MT_DEV_SHARED:
+ return true;
+ }
+ return false;
+}
+
#endif /* !__ASSEMBLY__ */
#endif /* __ARM_KVM_MMU_H__ */
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 6984342da13d..eb9a06e3dbee 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -213,7 +213,7 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
kvm_tlb_flush_vmid_ipa(kvm, addr);
/* No need to invalidate the cache for device mappings */
- if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+ if (!__kvm_pte_is_uncached(old_pte))
kvm_flush_dcache_pte(old_pte);
put_page(virt_to_page(pte));
@@ -305,8 +305,7 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
pte = pte_offset_kernel(pmd, addr);
do {
- if (!pte_none(*pte) &&
- (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+ if (!pte_none(*pte) && !__kvm_pte_is_uncached(*pte))
kvm_flush_dcache_pte(*pte);
} while (pte++, addr += PAGE_SIZE, addr != end);
}
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 61505676d085..5806f412a47a 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -302,5 +302,17 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
merged_hyp_pgd[idmap_idx] = __pgd(__pa(boot_hyp_pgd) | PMD_TYPE_TABLE);
}
+static inline bool __kvm_pte_is_uncached(pte_t pte)
+{
+ switch (pte_val(pte) & PTE_ATTRINDX_MASK) {
+ case PTE_ATTRINDX(MT_DEVICE_nGnRnE):
+ case PTE_ATTRINDX(MT_DEVICE_nGnRE):
+ case PTE_ATTRINDX(MT_DEVICE_GRE):
+ case PTE_ATTRINDX(MT_NORMAL_NC):
+ return true;
+ }
+ return false;
+}
+
#endif /* __ASSEMBLY__ */
#endif /* __ARM64_KVM_MMU_H__ */
--
1.9.1
next reply other threads:[~2015-11-06 11:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-06 11:43 Ard Biesheuvel [this message]
2015-11-09 7:24 ` [PATCH] ARM/arm64: KVM: test properly for a PTE's uncachedness Pavel Fedin
2015-11-09 8:17 ` Marc Zyngier
2015-11-09 16:21 ` Christoffer Dall
2015-11-09 16:27 ` Ard Biesheuvel
2015-11-09 16:35 ` Christoffer Dall
2015-11-09 16:59 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446810188-13727-1-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox