linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: kapilh@broadcom.com (Kapil Hali)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v2 1/4] dt-bindings: add SMP enable-method for Broadcom NSP
Date: Fri, 6 Nov 2015 14:49:28 -0500	[thread overview]
Message-ID: <1446839371-22601-2-git-send-email-kapilh@broadcom.com> (raw)
In-Reply-To: <1446839371-22601-1-git-send-email-kapilh@broadcom.com>

Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
Northstar Plus CPU to the 32-bit ARM CPU device tree binding
documentation file and create a new binding documentation for
Northstar Plus CPU.

Signed-off-by: Kapil Hali <kapilh@broadcom.com>
---
 .../bindings/arm/bcm/brcm,nsp-cpu-method.txt       | 36 ++++++++++++++++++++++
 Documentation/devicetree/bindings/arm/cpus.txt     |  1 +
 2 files changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..8506da7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,36 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+  - enable-method = "brcm,bcm-nsp-smp";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
+		secondary-boot-reg = <0xffff042c>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91e6e5c..6abe3f3 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -191,6 +191,7 @@ nodes to be present and contain the properties described below.
 			    "allwinner,sun8i-a23"
 			    "arm,psci"
 			    "brcm,brahma-b15"
+			    "brcm,bcm-nsp-smp"
 			    "marvell,armada-375-smp"
 			    "marvell,armada-380-smp"
 			    "marvell,armada-390-smp"
-- 
2.1.0

  reply	other threads:[~2015-11-06 19:49 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-06 19:49 [PATCH RESEND v2 0/4] SMP support for Broadcom NSP Kapil Hali
2015-11-06 19:49 ` Kapil Hali [this message]
2015-11-06 19:49 ` [PATCH RESEND v2 2/4] ARM: dts: add " Kapil Hali
2015-11-06 19:49 ` [PATCH RESEND v2 3/4] ARM: BCM: Add " Kapil Hali
2015-11-06 19:57   ` Florian Fainelli
2015-11-06 20:03     ` Florian Fainelli
2015-11-09 10:09   ` Linus Walleij
2015-11-10  2:29     ` Florian Fainelli
2015-11-10 16:21       ` Kapil Hali
2015-11-16 21:09         ` Linus Walleij
2015-11-06 19:49 ` [PATCH RESEND v2 4/4] ARM: BCM: Add SMP support for Broadcom 4708 Kapil Hali
2015-11-25  0:06 ` [PATCH RESEND v2 0/4] SMP support for Broadcom NSP Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446839371-22601-2-git-send-email-kapilh@broadcom.com \
    --to=kapilh@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).