[PATCH v5 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135

[eddie.huang@mediatek.com (Eddie Huang)]

On Mon, 2015-11-09 at 09:59 -0800, Kevin Hilman wrote:
> On Mon, Oct 26, 2015 at 4:40 AM, Eddie Huang <eddie.huang@mediatek.com> wrote:
> > Hi Kevin,
> >
> > On Mon, 2015-10-26 at 17:06 +0900, Kevin Hilman wrote:
> >> On Mon, Oct 26, 2015 at 4:15 PM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
> >> > On Mon, 2015-10-26 at 09:56 +0900, Kevin Hilman wrote:
> >> >> Hello,
> >> >>
> >> >> On Sat, Oct 3, 2015 at 12:19 AM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
> >> >> > Add arch timer node to enable arch-timer support. MT8135 firmware
> >> >> > doesn't correctly setup arch-timer frequency and CNTVOFF, add
> >> >> > properties to workaround this.
> >> >> >
> >> >> > This also set cpu enable-method to enable SMP.
> >> >> >
> >> >> > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
> >> >>
> >> >> kernelci.org started detecting new boot failures for the mt8135-evb in
> >> >> the arm-soc tree[1], and the boot failures were bisected down to this
> >> >> patch, which landed upstream in the form of commit d186a394bb98 (ARM:
> >> >> dts: mt8135: enable basic SMP bringup for mt8135)
> >> >>
> >> >> Maybe this new SMP support requires updating the firmware on the board
> >> >> as well?  If so, the changelog should've been a bit more explicit
> >> >> about firmware dependencies.
> >> >
> >> > Kevin,
> >> >
> >> > Thanks for testing.
> >> >
> >> > No, it doesn't need new firmware. Will test to see what's going wrong.
> >>
> >> Thanks for following up.  I'll be glad to test any patches if you have
> >> anything you'd like me to test.
> >
> > You need "clockevents/drivers/mtk: Fix spurious interrupt leading to
> > crash" (https://lkml.org/lkml/2015/8/24/803)
> >
> > Daniel Lezcano already applied this patch in his tree for 4.4.
> > (https://git.linaro.org/people/daniel.lezcano/linux.git)
> 
> The mt8135-evp board is still failing to boot in linux-next[1] (and
> has been since next-20151022.)  It appears the dependencies are not
> quite correct in linux-next either.
> 
> Kevin
> 
> [1]
> http://kernelci.org/boot/mt8135-evbp1/job/next/kernel/next-20151109/defconfig/multi_v7_defconfig/lab/lab-khilman/?_id=564037fe59b514b2f6091909

Hi Kevin,

I check the log [0], it seems first time mt8135-evbp1 boot to kernel
shell successfully, then boot again. In the second time, mt8135 stay in
fastboot mode, waiting host send boot image, then timeout.

I download zImage and dtb in [1], and kernel run to shell successfully
on my platform.

I don't know whether this issue caused by test environment or not.

[0]
http://storage.kernelci.org/next/next-20151109/arm-multi_v7_defconfig/lab-khilman/boot-mt8135-evbp1.txt
[1]
http://kernelci.org/boot/mt8135-evbp1/job/next/kernel/next-20151109/defconfig/multi_v7_defconfig/lab/lab-khilman/?_id=564037fe59b514b2f6091909#bisect-content