* [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk
2015-11-02 18:06 [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk Bai Ping
@ 2015-11-02 10:10 ` Lucas Stach
2015-11-10 9:59 ` Bai Ping
2015-11-10 10:11 ` Lucas Stach
2015-11-24 6:39 ` Shawn Guo
2 siblings, 1 reply; 5+ messages in thread
From: Lucas Stach @ 2015-11-02 10:10 UTC (permalink / raw)
To: linux-arm-kernel
Am Dienstag, den 03.11.2015, 02:06 +0800 schrieb Bai Ping:
> Add 'is_prepared' callback function for pllv3 type clk to make sure when
> the system is bootup, the unused clk is in a known state to match the
> prepare count info.
>
What does this commit fix?
Is it there to ensure clocks are turned off at the disable unused clocks
phase even if they haven't been prepared even once during bootup?
Regards,
Lucas
> Signed-off-by: Bai Ping <b51503@freescale.com>
> ---
> drivers/clk/imx/clk-pllv3.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index 6addf8f..c05c43d 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
> writel_relaxed(val, pll->base);
> }
>
> +static int clk_pllv3_is_prepared(struct clk_hw *hw)
> +{
> + struct clk_pllv3 *pll = to_clk_pllv3(hw);
> +
> + if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> + return 1;
> +
> + return 0;
> +}
> +
> static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> @@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_recalc_rate,
> .round_rate = clk_pllv3_round_rate,
> .set_rate = clk_pllv3_set_rate,
> @@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_sys_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_sys_recalc_rate,
> .round_rate = clk_pllv3_sys_round_rate,
> .set_rate = clk_pllv3_sys_set_rate,
> @@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_av_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_av_recalc_rate,
> .round_rate = clk_pllv3_av_round_rate,
> .set_rate = clk_pllv3_av_set_rate,
> @@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
> static const struct clk_ops clk_pllv3_enet_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_enet_recalc_rate,
> };
>
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk
2015-11-02 10:10 ` Lucas Stach
@ 2015-11-10 9:59 ` Bai Ping
0 siblings, 0 replies; 5+ messages in thread
From: Bai Ping @ 2015-11-10 9:59 UTC (permalink / raw)
To: linux-arm-kernel
On 2015/11/2 18:10, Lucas Stach wrote:
> Am Dienstag, den 03.11.2015, 02:06 +0800 schrieb Bai Ping:
>> Add 'is_prepared' callback function for pllv3 type clk to make sure when
>> the system is bootup, the unused clk is in a known state to match the
>> prepare count info.
>>
> What does this commit fix?
> Is it there to ensure clocks are turned off at the disable unused clocks
> phase even if they haven't been prepared even once during bootup?
I am sorry for replay you so later, it seem I missed this mail before.
yeah, this commit
just to make sure the PLLs that are not been prepared can be turned off.
sometimes,
the bootloader may turn on the PLL(take video PLL as example) for use,
but when the
kernel bootup, the prepare count for the PLL clock is zero, but actually
the PLL is powered on.
so adding the "is_prepared" ops to turn off the unused PLL to save power.
BR
Jacky Bai
>
> Regards,
> Lucas
>
>> Signed-off-by: Bai Ping <b51503@freescale.com>
>> ---
>> drivers/clk/imx/clk-pllv3.c | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
>> index 6addf8f..c05c43d 100644
>> --- a/drivers/clk/imx/clk-pllv3.c
>> +++ b/drivers/clk/imx/clk-pllv3.c
>> @@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
>> writel_relaxed(val, pll->base);
>> }
>>
>> +static int clk_pllv3_is_prepared(struct clk_hw *hw)
>> +{
>> + struct clk_pllv3 *pll = to_clk_pllv3(hw);
>> +
>> + if (readl_relaxed(pll->base) & BM_PLL_LOCK)
>> + return 1;
>> +
>> + return 0;
>> +}
>> +
>> static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
>> unsigned long parent_rate)
>> {
>> @@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
>> static const struct clk_ops clk_pllv3_ops = {
>> .prepare = clk_pllv3_prepare,
>> .unprepare = clk_pllv3_unprepare,
>> + .is_prepared = clk_pllv3_is_prepared,
>> .recalc_rate = clk_pllv3_recalc_rate,
>> .round_rate = clk_pllv3_round_rate,
>> .set_rate = clk_pllv3_set_rate,
>> @@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
>> static const struct clk_ops clk_pllv3_sys_ops = {
>> .prepare = clk_pllv3_prepare,
>> .unprepare = clk_pllv3_unprepare,
>> + .is_prepared = clk_pllv3_is_prepared,
>> .recalc_rate = clk_pllv3_sys_recalc_rate,
>> .round_rate = clk_pllv3_sys_round_rate,
>> .set_rate = clk_pllv3_sys_set_rate,
>> @@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
>> static const struct clk_ops clk_pllv3_av_ops = {
>> .prepare = clk_pllv3_prepare,
>> .unprepare = clk_pllv3_unprepare,
>> + .is_prepared = clk_pllv3_is_prepared,
>> .recalc_rate = clk_pllv3_av_recalc_rate,
>> .round_rate = clk_pllv3_av_round_rate,
>> .set_rate = clk_pllv3_av_set_rate,
>> @@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
>> static const struct clk_ops clk_pllv3_enet_ops = {
>> .prepare = clk_pllv3_prepare,
>> .unprepare = clk_pllv3_unprepare,
>> + .is_prepared = clk_pllv3_is_prepared,
>> .recalc_rate = clk_pllv3_enet_recalc_rate,
>> };
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk
2015-11-02 18:06 [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk Bai Ping
2015-11-02 10:10 ` Lucas Stach
@ 2015-11-10 10:11 ` Lucas Stach
2015-11-24 6:39 ` Shawn Guo
2 siblings, 0 replies; 5+ messages in thread
From: Lucas Stach @ 2015-11-10 10:11 UTC (permalink / raw)
To: linux-arm-kernel
Am Dienstag, den 03.11.2015, 02:06 +0800 schrieb Bai Ping:
> Add 'is_prepared' callback function for pllv3 type clk to make sure when
> the system is bootup, the unused clk is in a known state to match the
> prepare count info.
>
> Signed-off-by: Bai Ping <b51503@freescale.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> drivers/clk/imx/clk-pllv3.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index 6addf8f..c05c43d 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
> writel_relaxed(val, pll->base);
> }
>
> +static int clk_pllv3_is_prepared(struct clk_hw *hw)
> +{
> + struct clk_pllv3 *pll = to_clk_pllv3(hw);
> +
> + if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> + return 1;
> +
> + return 0;
> +}
> +
> static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> @@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_recalc_rate,
> .round_rate = clk_pllv3_round_rate,
> .set_rate = clk_pllv3_set_rate,
> @@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_sys_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_sys_recalc_rate,
> .round_rate = clk_pllv3_sys_round_rate,
> .set_rate = clk_pllv3_sys_set_rate,
> @@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_av_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_av_recalc_rate,
> .round_rate = clk_pllv3_av_round_rate,
> .set_rate = clk_pllv3_av_set_rate,
> @@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
> static const struct clk_ops clk_pllv3_enet_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_enet_recalc_rate,
> };
>
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk
2015-11-02 18:06 [PATCH] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk Bai Ping
2015-11-02 10:10 ` Lucas Stach
2015-11-10 10:11 ` Lucas Stach
@ 2015-11-24 6:39 ` Shawn Guo
2 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-11-24 6:39 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 03, 2015 at 02:06:09AM +0800, Bai Ping wrote:
> Add 'is_prepared' callback function for pllv3 type clk to make sure when
> the system is bootup, the unused clk is in a known state to match the
> prepare count info.
>
> Signed-off-by: Bai Ping <b51503@freescale.com>
Please resend the patch with following clk maintainers and list on copy.
Also remember to add Lucas' Reviewed-by: tag.
COMMON CLK FRAMEWORK
M: Michael Turquette <mturquette@baylibre.com>
M: Stephen Boyd <sboyd@codeaurora.org>
L: linux-clk at vger.kernel.org
Shawn
> ---
> drivers/clk/imx/clk-pllv3.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> index 6addf8f..c05c43d 100644
> --- a/drivers/clk/imx/clk-pllv3.c
> +++ b/drivers/clk/imx/clk-pllv3.c
> @@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
> writel_relaxed(val, pll->base);
> }
>
> +static int clk_pllv3_is_prepared(struct clk_hw *hw)
> +{
> + struct clk_pllv3 *pll = to_clk_pllv3(hw);
> +
> + if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> + return 1;
> +
> + return 0;
> +}
> +
> static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> @@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_recalc_rate,
> .round_rate = clk_pllv3_round_rate,
> .set_rate = clk_pllv3_set_rate,
> @@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_sys_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_sys_recalc_rate,
> .round_rate = clk_pllv3_sys_round_rate,
> .set_rate = clk_pllv3_sys_set_rate,
> @@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
> static const struct clk_ops clk_pllv3_av_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_av_recalc_rate,
> .round_rate = clk_pllv3_av_round_rate,
> .set_rate = clk_pllv3_av_set_rate,
> @@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
> static const struct clk_ops clk_pllv3_enet_ops = {
> .prepare = clk_pllv3_prepare,
> .unprepare = clk_pllv3_unprepare,
> + .is_prepared = clk_pllv3_is_prepared,
> .recalc_rate = clk_pllv3_enet_recalc_rate,
> };
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 5+ messages in thread