From: stefano.stabellini@eu.citrix.com (Stefano Stabellini)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/7] xen/arm: introduce xen_read_wallclock
Date: Tue, 10 Nov 2015 11:57:54 +0000 [thread overview]
Message-ID: <1447156675-7418-6-git-send-email-stefano.stabellini@eu.citrix.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1511101131350.5676@kaball.uk.xensource.com>
Read the wallclock from the shared info page at boot time.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
Changes in v2:
- properly convert arch_timer ticker to nsec
- use timespec64 interfaces
- use sec_hi to get a 64-bit seconds value
---
arch/arm/Kconfig | 1 +
arch/arm/xen/enlighten.c | 33 +++++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 60be104..a9de420 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1852,6 +1852,7 @@ config XEN
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
depends on MMU
+ depends on HAVE_ARM_ARCH_TIMER
select ARCH_DMA_ADDR_T_64BIT
select ARM_PSCI
select SWIOTLB_XEN
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 2f57ba3..32675b5 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -28,6 +28,8 @@
#include <linux/cpufreq.h>
#include <linux/cpu.h>
#include <linux/console.h>
+#include <linux/timekeeping.h>
+#include <clocksource/arm_arch_timer.h>
#include <linux/mm.h>
@@ -95,6 +97,34 @@ static unsigned long long xen_stolen_accounting(int cpu)
return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline];
}
+static void xen_read_wallclock(struct timespec64 *ts)
+{
+ u32 version;
+ u64 delta;
+ struct timespec64 now;
+ struct shared_info *s = HYPERVISOR_shared_info;
+ struct pvclock_wall_clock *wall_clock = &(s->wc);
+
+ /* get wallclock at system boot */
+ do {
+ version = wall_clock->version;
+ rmb(); /* fetch version before time */
+ now.tv_sec = ((uint64_t)wall_clock->sec_hi << 32) | wall_clock->sec;
+ now.tv_nsec = wall_clock->nsec;
+ rmb(); /* fetch time before checking version */
+ } while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+ delta = arch_timer_read_counter() * (u64)NSEC_PER_SEC;
+ do_div(delta, arch_timer_get_rate()); /* time since system boot */
+ delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
+
+ now.tv_nsec = do_div(delta, NSEC_PER_SEC);
+ now.tv_sec = delta;
+
+ set_normalized_timespec64(ts, now.tv_sec, now.tv_nsec);
+
+}
+
static void xen_percpu_init(void)
{
struct vcpu_register_vcpu_info info;
@@ -218,6 +248,7 @@ static int __init xen_guest_init(void)
struct shared_info *shared_info_page = NULL;
struct resource res;
phys_addr_t grant_frames;
+ struct timespec64 ts;
if (!xen_domain())
return 0;
@@ -291,6 +322,8 @@ static int __init xen_guest_init(void)
pv_time_ops.steal_clock = xen_stolen_accounting;
static_key_slow_inc(¶virt_steal_enabled);
+ xen_read_wallclock(&ts);
+ do_settimeofday64(&ts);
return 0;
}
--
1.7.10.4
next prev parent reply other threads:[~2015-11-10 11:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-10 11:56 [PATCH v2 0/7] Xen wallclock on arm and arm64 Stefano Stabellini
2015-11-10 11:57 ` [PATCH v2 1/7] timekeeping: introduce __current_kernel_time64 Stefano Stabellini
2015-11-10 12:22 ` Peter Zijlstra
2015-11-10 14:34 ` Stefano Stabellini
2015-11-10 12:29 ` Arnd Bergmann
2015-11-10 15:10 ` Stefano Stabellini
2015-11-10 15:26 ` John Stultz
2015-11-10 15:31 ` Thomas Gleixner
2015-11-10 15:41 ` John Stultz
2015-11-10 15:55 ` Thomas Gleixner
2015-11-11 11:51 ` Stefano Stabellini
2015-11-11 13:31 ` Arnd Bergmann
2015-11-10 11:57 ` [PATCH v2 2/7] xen: rename dom0_op to platform_op Stefano Stabellini
2015-11-10 11:57 ` [PATCH v2 3/7] xen/arm: introduce HYPERVISOR_platform_op on arm and arm64 Stefano Stabellini
2015-11-10 11:57 ` [PATCH v2 4/7] xen: introduce XENPF_settime64 Stefano Stabellini
2015-11-10 12:32 ` Arnd Bergmann
2015-11-10 14:43 ` Stefano Stabellini
2015-11-10 14:47 ` Arnd Bergmann
2015-11-10 11:57 ` [PATCH v2 5/7] arm: extend pvclock_wall_clock with sec_hi Stefano Stabellini
2015-11-10 11:57 ` Stefano Stabellini [this message]
2015-11-10 12:35 ` [PATCH v2 6/7] xen/arm: introduce xen_read_wallclock Arnd Bergmann
2015-11-10 11:57 ` [PATCH v2 7/7] xen/arm: set the system time in Xen via the XENPF_settime64 hypercall Stefano Stabellini
2015-11-10 12:39 ` Arnd Bergmann
2015-11-10 15:58 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447156675-7418-6-git-send-email-stefano.stabellini@eu.citrix.com \
--to=stefano.stabellini@eu.citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).