[PATCH] ARM: dts: Kirkwood: Fix QNAP TS219 power-off

[andrew@lunn.ch (Andrew Lunn)]

From: Helmut Klein <hgkr.klein@gmail.com>

The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi"
addressed the wrong uart (0 = console). This patch changes the address
to select uart 1, which is the uart connected to the pic
microcontroller, which can switch the device off.

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.")
---

Hi Helmut

I made a few minor changes to your patch:

1) Made subject line consistent with other patches to kirkwood-ts219.dtsi
2) Added a Fixes: tag, so that it gets backported to stable
3) Put comments after the ---, so they don't land in the change log.

Hi Gregory

This is a fix, i guess too late for this merge window, so please could
you send it after -rc1 is out?
---
 arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6bbfe3c..0e46560551f4 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -40,7 +40,7 @@
 		};
 		poweroff at 12100 {
 			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
+			reg = <0x12100 0x100>;
 			clocks = <&gate_clk 7>;
 		};
 		spi at 10600 {
-- 
2.6.1