From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrew@lunn.ch (Andrew Lunn) Date: Wed, 11 Nov 2015 15:03:04 +0100 Subject: [PATCH] ARM: dts: Kirkwood: Fix QNAP TS219 power-off Message-ID: <1447250584-10153-1-git-send-email-andrew@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Helmut Klein The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by: Helmut Klein Signed-off-by: Andrew Lunn Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.") --- Hi Helmut I made a few minor changes to your patch: 1) Made subject line consistent with other patches to kirkwood-ts219.dtsi 2) Added a Fixes: tag, so that it gets backported to stable 3) Put comments after the ---, so they don't land in the change log. Hi Gregory This is a fix, i guess too late for this merge window, so please could you send it after -rc1 is out? --- arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index c56ab6bbfe3c..0e46560551f4 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -40,7 +40,7 @@ }; poweroff at 12100 { compatible = "qnap,power-off"; - reg = <0x12000 0x100>; + reg = <0x12100 0x100>; clocks = <&gate_clk 7>; }; spi at 10600 { -- 2.6.1