linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/8] phy: rockchip-usb: expose the phy-internal PLLs
Date: Thu, 19 Nov 2015 22:22:26 +0100	[thread overview]
Message-ID: <1447968149-10979-6-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1447968149-10979-1-git-send-email-heiko@sntech.de>

The USB phys on Rockchip SoCs contain their own internal PLLs to create
the 480MHz needed. Additionally this PLL output is also fed back into the
core clock-controller as possible source for clocks like the GPU or others.

Until now this was modelled incorrectly with a "virtual" factor clock in
the clock controller. The one big caveat is that if we turn off the usb phy
via the siddq signal, all analog components get turned off, including the
PLLs. It is therefore possible that a source clock gets disabled without
the clock driver ever knowing, possibly making the system hang.

Therefore register the phy-plls as real clocks that the clock driver can
then reference again normally, making the clock hirarchy finally reflect
the actual hardware.

The phy-ops get converted to simply turning that new clock on and off
which in turn controls the siddq signal of the phy.

Through this the driver gains handling for platform-specific data, to
handle the phy->clock name association.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 .../devicetree/bindings/phy/rockchip-usb-phy.txt   |   1 +
 drivers/phy/phy-rockchip-usb.c                     | 188 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 27 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
index 9b37242..68498d5 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -24,6 +24,7 @@ required properties:
 Optional Properties:
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names: string, clock name, must be "phyclk"
+- #clock-cells: for users of the phy-pll, should be 0
 
 Example:
 
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index 16cd533..33a80eb 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -15,12 +15,14 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -36,15 +38,28 @@
 #define SIDDQ_ON		BIT(13)
 #define SIDDQ_OFF		(0 << 13)
 
+struct rockchip_usb_phys {
+	int reg;
+	const char *pll_name;
+};
+
+struct rockchip_usb_phy_pdata {
+	struct rockchip_usb_phys *phys;
+};
+
 struct rockchip_usb_phy_base {
 	struct device *dev;
 	struct regmap *reg_base;
+	const struct rockchip_usb_phy_pdata *pdata;
 };
 
 struct rockchip_usb_phy {
 	struct rockchip_usb_phy_base *base;
+	struct device_node *np;
 	unsigned int	reg_offset;
 	struct clk	*clk;
+	struct clk      *clk480m;
+	struct clk_hw	clk480m_hw;
 	struct phy	*phy;
 };
 
@@ -55,17 +70,59 @@ static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
 			    SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF));
 }
 
-static int rockchip_usb_phy_power_off(struct phy *_phy)
+static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
 {
-	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
-	int ret = 0;
+	return 480000000;
+}
+
+static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
 
 	/* Power down usb phy analog blocks by set siddq 1 */
-	ret = rockchip_usb_phy_power(phy, 1);
-	if (ret)
+	rockchip_usb_phy_power(phy, 1);
+}
+
+static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
+
+	/* Power up usb phy analog blocks by set siddq 0 */
+	return rockchip_usb_phy_power(phy, 0);
+}
+
+static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
+{
+	struct rockchip_usb_phy *phy = container_of(hw,
+						    struct rockchip_usb_phy,
+						    clk480m_hw);
+	int ret;
+	u32 val;
+
+	ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
+	if (ret < 0)
 		return ret;
 
-	clk_disable_unprepare(phy->clk);
+	return (val & SIDDQ_ON) ? 0 : 1;
+}
+
+static const struct clk_ops rockchip_usb_phy480m_ops = {
+	.enable = rockchip_usb_phy480m_enable,
+	.disable = rockchip_usb_phy480m_disable,
+	.is_enabled = rockchip_usb_phy480m_is_enabled,
+	.recalc_rate = rockchip_usb_phy480m_recalc_rate,
+};
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	clk_disable_unprepare(phy->clk480m);
 
 	return 0;
 }
@@ -73,20 +130,8 @@ static int rockchip_usb_phy_power_off(struct phy *_phy)
 static int rockchip_usb_phy_power_on(struct phy *_phy)
 {
 	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
-	int ret = 0;
 
-	ret = clk_prepare_enable(phy->clk);
-	if (ret)
-		return ret;
-
-	/* Power up usb phy analog blocks by set siddq 0 */
-	ret = rockchip_usb_phy_power(phy, 0);
-	if (ret) {
-		clk_disable_unprepare(phy->clk);
-		return ret;
-	}
-
-	return 0;
+	return clk_prepare_enable(phy->clk480m);
 }
 
 static const struct phy_ops ops = {
@@ -99,6 +144,9 @@ static void rockchip_usb_phy_action(void *data)
 {
 	struct rockchip_usb_phy *rk_phy = data;
 
+	of_clk_del_provider(rk_phy->np);
+	clk_unregister(rk_phy->clk480m);
+
 	if (rk_phy->clk)
 		clk_put(rk_phy->clk);
 }
@@ -108,13 +156,16 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 {
 	struct rockchip_usb_phy *rk_phy;
 	unsigned int reg_offset;
-	int err;
+	const char *clk_name;
+	struct clk_init_data init;
+	int err, i;
 
 	rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
 	if (!rk_phy)
 		return -ENOMEM;
 
 	rk_phy->base = base;
+	rk_phy->np = child;
 
 	if (of_property_read_u32(child, "reg", &reg_offset)) {
 		dev_err(base->dev, "missing reg property in node %s\n",
@@ -124,14 +175,54 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 
 	rk_phy->reg_offset = reg_offset;
 
-	err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
-	if (err)
-		return err;
-
 	rk_phy->clk = of_clk_get_by_name(child, "phyclk");
 	if (IS_ERR(rk_phy->clk))
 		rk_phy->clk = NULL;
 
+	i = 0;
+	init.name = NULL;
+	while (base->pdata->phys[i].reg) {
+		if (base->pdata->phys[i].reg == reg_offset) {
+			init.name = base->pdata->phys[i].pll_name;
+			break;
+		}
+		i++;
+	}
+
+	if (!init.name) {
+		dev_err(base->dev, "phy data not found\n");
+		return -EINVAL;
+	}
+
+	if (rk_phy->clk) {
+		clk_name = __clk_get_name(rk_phy->clk);
+		init.flags = 0;
+		init.parent_names = &clk_name;
+		init.num_parents = 1;
+	} else {
+		init.flags = CLK_IS_ROOT;
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	}
+
+	init.ops = &rockchip_usb_phy480m_ops;
+	rk_phy->clk480m_hw.init = &init;
+
+	rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
+	if (IS_ERR(rk_phy->clk480m)) {
+		err = PTR_ERR(rk_phy->clk480m);
+		goto err_clk;
+	}
+
+	err = of_clk_add_provider(child, of_clk_src_simple_get,
+				  rk_phy->clk480m);
+	if (err < 0)
+		goto err_clk_prov;
+
+	err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
+	if (err)
+		goto err_devm_action;
+
 	rk_phy->phy = devm_phy_create(base->dev, child, &ops);
 	if (IS_ERR(rk_phy->phy)) {
 		dev_err(base->dev, "failed to create PHY\n");
@@ -141,13 +232,48 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 
 	/* only power up usb phy when it use, so disable it when init*/
 	return rockchip_usb_phy_power(rk_phy, 1);
+
+err_devm_action:
+	of_clk_del_provider(child);
+err_clk_prov:
+	clk_unregister(rk_phy->clk480m);
+err_clk:
+	if (rk_phy->clk)
+		clk_put(rk_phy->clk);
+	return err;
 }
 
+static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
+		{ /* sentinel */ }
+	},
+};
+
+static const struct rockchip_usb_phy_pdata rk3188_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
+		{ /* sentinel */ }
+	},
+};
+
+static const struct rockchip_usb_phy_pdata rk3288_pdata = {
+	.phys = (struct rockchip_usb_phys[]){
+		{ .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
+		{ .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
+		{ .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
+		{ /* sentinel */ }
+	},
+};
+
 static int rockchip_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rockchip_usb_phy_base *phy_base;
 	struct phy_provider *phy_provider;
+	const struct of_device_id *match;
 	struct device_node *child;
 	int err;
 
@@ -155,6 +281,14 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
 	if (!phy_base)
 		return -ENOMEM;
 
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "missing phy data\n");
+		return -EINVAL;
+	}
+
+	phy_base->pdata = match->data;
+
 	phy_base->dev = dev;
 	phy_base->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node,
 							     "rockchip,grf");
@@ -176,9 +310,9 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
-	{ .compatible = "rockchip,rk3066a-usb-phy" },
-	{ .compatible = "rockchip,rk3188-usb-phy" },
-	{ .compatible = "rockchip,rk3288-usb-phy" },
+	{ .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
+	{ .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
+	{ .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
 	{}
 };
 
-- 
2.6.2

  parent reply	other threads:[~2015-11-19 21:22 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-19 21:22 [PATCH v3 0/8] phy: rockchip-usb: correct pll handling and usb-uart Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 1/8] phy: rockchip-usb: fix clock get-put mismatch Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 2/8] phy: rockchip-usb: introduce a common data-struct for the device Heiko Stuebner
2015-11-20  0:38   ` Doug Anderson
2015-11-19 21:22 ` [PATCH v3 3/8] phy: rockchip-usb: move per-phy init into a separate function Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 4/8] phy: rockchip-usb: add compatible values for rk3066a and rk3188 Heiko Stuebner
2015-11-20  0:32   ` Doug Anderson
2015-11-22 19:49     ` Heiko Stuebner
2015-11-25 17:04       ` Doug Anderson
2015-11-25 18:24         ` Heiko Stübner
2015-11-25 18:35           ` Doug Anderson
2015-11-19 21:22 ` Heiko Stuebner [this message]
2015-12-15 10:53   ` [PATCH v3 5/8] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I
2015-12-21 20:00     ` Michael Turquette
2015-11-19 21:22 ` [PATCH v3 6/8] ARM: dts: rockchip: add clock-cells for usb phy nodes Heiko Stuebner
2016-01-25 14:06   ` Heiko Stübner
2015-11-19 21:22 ` [PATCH v3 7/8] clk: rockchip: fix usbphy-related clocks Heiko Stuebner
2015-12-15 10:52   ` Kishon Vijay Abraham I
2015-12-19 17:21     ` Heiko Stübner
2015-12-20  9:09       ` Kishon Vijay Abraham I
2016-01-25 14:04   ` Heiko Stübner
2015-11-19 21:22 ` [PATCH v3 8/8] phy: rockchip-usb: add handler for usb-uart functionality Heiko Stuebner
2015-12-02 15:32 ` [PATCH v3 0/8] phy: rockchip-usb: correct pll handling and usb-uart Heiko Stübner
2015-12-03  6:05   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447968149-10979-6-git-send-email-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).