* [PATCH 1/3] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi
2012-09-03 12:34 [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Tomasz Figa
@ 2012-09-03 12:34 ` Tomasz Figa
2012-09-03 12:34 ` [PATCH 2/3] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210 Tomasz Figa
` (2 subsequent siblings)
3 siblings, 0 replies; 16+ messages in thread
From: Tomasz Figa @ 2012-09-03 12:34 UTC (permalink / raw)
To: linux-arm-kernel
Most definitions from Exynos4210.dtsi can be applied for other SoCs from
Exynos4 line as well, so move the common part into separate file that
can be included by dtsi files of other Exynos4 SoCs (as well as current
Exynos4210.dtsi).
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/boot/dts/exynos4.dtsi | 210 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 181 +-------------------------------
2 files changed, 211 insertions(+), 180 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4.dtsi
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
new file mode 100644
index 0000000..e446fe7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -0,0 +1,210 @@
+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ };
+
+ gic:interrupt-controller at 10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ combiner:interrupt-controller at 10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x10440000 0x1000>;
+ };
+
+ watchdog at 10060000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 43 0>;
+ };
+
+ rtc at 10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 44 0>, <0 45 0>;
+ };
+
+ keypad at 100A0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <0 109 0>;
+ };
+
+ sdhci at 12510000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12510000 0x100>;
+ interrupts = <0 73 0>;
+ };
+
+ sdhci at 12520000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12520000 0x100>;
+ interrupts = <0 74 0>;
+ };
+
+ sdhci at 12530000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12530000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci at 12540000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12540000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ serial at 13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial at 13810000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13810000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial at 13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ serial at 13830000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13830000 0x100>;
+ interrupts = <0 55 0>;
+ };
+
+ i2c at 13860000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c at 13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c at 13880000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c at 13890000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c at 138A0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138A0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c at 138B0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138B0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ i2c at 138C0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138C0000 0x100>;
+ interrupts = <0 64 0>;
+ };
+
+ i2c at 138D0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138D0000 0x100>;
+ interrupts = <0 65 0>;
+ };
+
+ spi_0: spi at 13920000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13920000 0x100>;
+ interrupts = <0 66 0>;
+ tx-dma-channel = <&pdma0 7>; /* preliminary */
+ rx-dma-channel = <&pdma0 6>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_1: spi at 13930000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13930000 0x100>;
+ interrupts = <0 67 0>;
+ tx-dma-channel = <&pdma1 7>; /* preliminary */
+ rx-dma-channel = <&pdma1 6>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi_2: spi at 13940000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13940000 0x100>;
+ interrupts = <0 68 0>;
+ tx-dma-channel = <&pdma0 9>; /* preliminary */
+ rx-dma-channel = <&pdma0 8>; /* preliminary */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma at 12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ pdma1: pdma at 12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <0 36 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe..c71db9c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -19,201 +19,22 @@
* published by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+/include/ "exynos4.dtsi"
/ {
compatible = "samsung,exynos4210";
- interrupt-parent = <&gic>;
-
- aliases {
- spi0 = &spi_0;
- spi1 = &spi_1;
- spi2 = &spi_2;
- };
gic:interrupt-controller at 10490000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
cpu-offset = <0x8000>;
- reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
combiner:interrupt-controller at 10440000 {
- compatible = "samsung,exynos4210-combiner";
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
- watchdog at 10060000 {
- compatible = "samsung,s3c2410-wdt";
- reg = <0x10060000 0x100>;
- interrupts = <0 43 0>;
- };
-
- rtc at 10070000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x10070000 0x100>;
- interrupts = <0 44 0>, <0 45 0>;
- };
-
- keypad at 100A0000 {
- compatible = "samsung,s5pv210-keypad";
- reg = <0x100A0000 0x100>;
- interrupts = <0 109 0>;
- };
-
- sdhci at 12510000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12510000 0x100>;
- interrupts = <0 73 0>;
- };
-
- sdhci at 12520000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12520000 0x100>;
- interrupts = <0 74 0>;
- };
-
- sdhci at 12530000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12530000 0x100>;
- interrupts = <0 75 0>;
- };
-
- sdhci at 12540000 {
- compatible = "samsung,exynos4210-sdhci";
- reg = <0x12540000 0x100>;
- interrupts = <0 76 0>;
- };
-
- serial at 13800000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
- };
-
- serial at 13810000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x13810000 0x100>;
- interrupts = <0 53 0>;
- };
-
- serial at 13820000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x13820000 0x100>;
- interrupts = <0 54 0>;
- };
-
- serial at 13830000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x13830000 0x100>;
- interrupts = <0 55 0>;
- };
-
- i2c at 13860000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13860000 0x100>;
- interrupts = <0 58 0>;
- };
-
- i2c at 13870000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13870000 0x100>;
- interrupts = <0 59 0>;
- };
-
- i2c at 13880000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13880000 0x100>;
- interrupts = <0 60 0>;
- };
-
- i2c at 13890000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13890000 0x100>;
- interrupts = <0 61 0>;
- };
-
- i2c at 138A0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x138A0000 0x100>;
- interrupts = <0 62 0>;
- };
-
- i2c at 138B0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x138B0000 0x100>;
- interrupts = <0 63 0>;
- };
-
- i2c at 138C0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x138C0000 0x100>;
- interrupts = <0 64 0>;
- };
-
- i2c at 138D0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x138D0000 0x100>;
- interrupts = <0 65 0>;
- };
-
- spi_0: spi at 13920000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x13920000 0x100>;
- interrupts = <0 66 0>;
- tx-dma-channel = <&pdma0 7>; /* preliminary */
- rx-dma-channel = <&pdma0 6>; /* preliminary */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi_1: spi at 13930000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x13930000 0x100>;
- interrupts = <0 67 0>;
- tx-dma-channel = <&pdma1 7>; /* preliminary */
- rx-dma-channel = <&pdma1 6>; /* preliminary */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi_2: spi at 13940000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x13940000 0x100>;
- interrupts = <0 68 0>;
- tx-dma-channel = <&pdma0 9>; /* preliminary */
- rx-dma-channel = <&pdma0 8>; /* preliminary */
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "arm,amba-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pdma0: pdma at 12680000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12680000 0x1000>;
- interrupts = <0 35 0>;
- };
-
- pdma1: pdma at 12690000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12690000 0x1000>;
- interrupts = <0 36 0>;
- };
- };
-
gpio-controllers {
#address-cells = <1>;
#size-cells = <1>;
--
1.7.12
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/3] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210
2012-09-03 12:34 [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Tomasz Figa
2012-09-03 12:34 ` [PATCH 1/3] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi Tomasz Figa
@ 2012-09-03 12:34 ` Tomasz Figa
2012-09-03 12:34 ` [PATCH 3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled Tomasz Figa
2012-09-05 3:31 ` [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Thomas Abraham
3 siblings, 0 replies; 16+ messages in thread
From: Tomasz Figa @ 2012-09-03 12:34 UTC (permalink / raw)
To: linux-arm-kernel
Since mach-exynos4-dt.c is also going to be used for other SoCs from Exynos4
line, rename internal structures and functions to use exynos4_ prefix, instead
of exynos4210_.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-exynos/mach-exynos4-dt.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index b2b5d5f..8dad4ec 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -1,5 +1,5 @@
/*
- * Samsung's Exynos4210 flattened device tree enabled machine
+ * Samsung's Exynos4 flattened device tree enabled machine
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -36,7 +36,7 @@
* at some point, the drivers should be capable of parsing all the platform
* data from the device tree.
*/
-static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
"exynos4210-uart.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
@@ -66,19 +66,19 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
{},
};
-static void __init exynos4210_dt_map_io(void)
+static void __init exynos4_dt_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
-static void __init exynos4210_dt_machine_init(void)
+static void __init exynos4_dt_machine_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
- exynos4210_auxdata_lookup, NULL);
+ exynos4_auxdata_lookup, NULL);
}
-static char const *exynos4210_dt_compat[] __initdata = {
+static char const *exynos4_dt_compat[] __initdata = {
"samsung,exynos4210",
NULL
};
@@ -86,11 +86,11 @@ static char const *exynos4210_dt_compat[] __initdata = {
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.init_irq = exynos4_init_irq,
- .map_io = exynos4210_dt_map_io,
+ .map_io = exynos4_dt_map_io,
.handle_irq = gic_handle_irq,
- .init_machine = exynos4210_dt_machine_init,
+ .init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
- .dt_compat = exynos4210_dt_compat,
+ .dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
MACHINE_END
--
1.7.12
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled
2012-09-03 12:34 [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Tomasz Figa
2012-09-03 12:34 ` [PATCH 1/3] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi Tomasz Figa
2012-09-03 12:34 ` [PATCH 2/3] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210 Tomasz Figa
@ 2012-09-03 12:34 ` Tomasz Figa
2012-09-03 13:28 ` [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310 Tomasz Figa
2012-09-05 3:31 ` [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Thomas Abraham
3 siblings, 1 reply; 16+ messages in thread
From: Tomasz Figa @ 2012-09-03 12:34 UTC (permalink / raw)
To: linux-arm-kernel
Currently all boards must explicitly disable all unused device tree
nodes of unused components (e.g. i2c, sdhci, etc...). This makes it
necessary to all boards to be aware of all components on the SoC, which
in turns makes board dts files longer and more difficult to maintain
(e.g. adding new components to SoC-level tree requires adding nodes with
status="disabled" to every board).
This patch changes "status" of all optional components in SoC-level dts
file to "disabled", adds status="okay" to respective nodes of used
components in dts of all boards and removes all nodes with only
status="disabled" from boards dts.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/boot/dts/exynos4.dtsi | 22 ++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 58 ++-----------------------------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 52 +++------------------------
3 files changed, 28 insertions(+), 104 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e446fe7..9b71b61 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -48,114 +48,133 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ status = "disabled";
};
rtc at 10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ status = "disabled";
};
keypad at 100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ status = "disabled";
};
sdhci at 12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ status = "disabled";
};
sdhci at 12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ status = "disabled";
};
sdhci at 12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ status = "disabled";
};
sdhci at 12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ status = "disabled";
};
serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ status = "disabled";
};
serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ status = "disabled";
};
serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ status = "disabled";
};
serial at 13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ status = "disabled";
};
i2c at 13860000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ status = "disabled";
};
i2c at 13870000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ status = "disabled";
};
i2c at 13880000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ status = "disabled";
};
i2c at 13890000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ status = "disabled";
};
i2c at 138A0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ status = "disabled";
};
i2c at 138B0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ status = "disabled";
};
i2c at 138C0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ status = "disabled";
};
i2c at 138D0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ status = "disabled";
};
spi_0: spi at 13920000 {
@@ -166,6 +185,7 @@
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
spi_1: spi at 13930000 {
@@ -176,6 +196,7 @@
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
spi_2: spi at 13940000 {
@@ -186,6 +207,7 @@
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
amba {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0c49caa..d1a1101 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -40,6 +40,7 @@
<&gpk2 4 2 3 3>,
<&gpk2 5 2 3 3>,
<&gpk2 6 2 3 3>;
+ status = "okay";
};
sdhci at 12510000 {
@@ -53,6 +54,7 @@
<&gpk0 4 2 3 3>,
<&gpk0 5 2 3 3>,
<&gpk0 6 2 3 3>;
+ status = "okay";
};
gpio_keys {
@@ -90,60 +92,4 @@
linux,code = <139>;
};
};
-
- keypad at 100A0000 {
- status = "disabled";
- };
-
- sdhci at 12520000 {
- status = "disabled";
- };
-
- sdhci at 12540000 {
- status = "disabled";
- };
-
- i2c at 13860000 {
- status = "disabled";
- };
-
- i2c at 13870000 {
- status = "disabled";
- };
-
- i2c at 13880000 {
- status = "disabled";
- };
-
- i2c at 13890000 {
- status = "disabled";
- };
-
- i2c at 138A0000 {
- status = "disabled";
- };
-
- i2c at 138B0000 {
- status = "disabled";
- };
-
- i2c at 138C0000 {
- status = "disabled";
- };
-
- i2c at 138D0000 {
- status = "disabled";
- };
-
- spi_0: spi at 13920000 {
- status = "disabled";
- };
-
- spi_1: spi at 13930000 {
- status = "disabled";
- };
-
- spi_2: spi at 13940000 {
- status = "disabled";
- };
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 1beccc8..b87cca2 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -40,6 +40,7 @@
<&gpk2 4 2 3 3>,
<&gpk2 5 2 3 3>,
<&gpk2 6 2 3 3>;
+ status = "okay";
};
keypad at 100A0000 {
@@ -47,6 +48,7 @@
samsung,keypad-num-columns = <8>;
linux,keypad-no-autorepeat;
linux,keypad-wakeup;
+ status = "okay";
row-gpios = <&gpx2 0 3 3 0>,
<&gpx2 1 3 3 0>;
@@ -128,6 +130,7 @@
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpd1 0 2 3 0>,
<&gpd1 1 2 3 0>;
+ status = "okay";
eeprom at 50 {
compatible = "samsung,24ad0xd1";
@@ -140,58 +143,11 @@
};
};
- sdhci at 12510000 {
- status = "disabled";
- };
-
- sdhci at 12520000 {
- status = "disabled";
- };
-
- sdhci at 12540000 {
- status = "disabled";
- };
-
- i2c at 13870000 {
- status = "disabled";
- };
-
- i2c at 13880000 {
- status = "disabled";
- };
-
- i2c at 13890000 {
- status = "disabled";
- };
-
- i2c at 138A0000 {
- status = "disabled";
- };
-
- i2c at 138B0000 {
- status = "disabled";
- };
-
- i2c at 138C0000 {
- status = "disabled";
- };
-
- i2c at 138D0000 {
- status = "disabled";
- };
-
- spi_0: spi at 13920000 {
- status = "disabled";
- };
-
- spi_1: spi at 13930000 {
- status = "disabled";
- };
-
spi_2: spi at 13940000 {
gpios = <&gpc1 1 5 3 0>,
<&gpc1 3 5 3 0>,
<&gpc1 4 5 3 0>;
+ status = "okay";
w25x80 at 0 {
#address-cells = <1>;
--
1.7.12
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310
2012-09-03 12:34 ` [PATCH 3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled Tomasz Figa
@ 2012-09-03 13:28 ` Tomasz Figa
2012-09-08 2:36 ` Kukjin Kim
0 siblings, 1 reply; 16+ messages in thread
From: Tomasz Figa @ 2012-09-03 13:28 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds status override of serial nodes to enable used serial ports
on Origen and SMDKV310 board.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 16 ++++++++++++++++
arch/arm/boot/dts/exynos4210-smdkv310.dts | 16 ++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index d1a1101..c7295fb 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -57,6 +57,22 @@
status = "okay";
};
+ serial at 13800000 {
+ status = "okay";
+ };
+
+ serial at 13810000 {
+ status = "okay";
+ };
+
+ serial at 13820000 {
+ status = "okay";
+ };
+
+ serial at 13830000 {
+ status = "okay";
+ };
+
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index b87cca2..f634907 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,22 @@
status = "okay";
};
+ serial at 13800000 {
+ status = "okay";
+ };
+
+ serial at 13810000 {
+ status = "okay";
+ };
+
+ serial at 13820000 {
+ status = "okay";
+ };
+
+ serial at 13830000 {
+ status = "okay";
+ };
+
keypad at 100A0000 {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
--
1.7.12
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310
2012-09-03 13:28 ` [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310 Tomasz Figa
@ 2012-09-08 2:36 ` Kukjin Kim
2012-09-08 8:07 ` Tomasz Figa
0 siblings, 1 reply; 16+ messages in thread
From: Kukjin Kim @ 2012-09-08 2:36 UTC (permalink / raw)
To: linux-arm-kernel
Tomasz Figa wrote:
>
> This patch adds status override of serial nodes to enable used serial
> ports
> on Origen and SMDKV310 board.
>
Well...I'm not sure about the status of Origen serial, but all of the
serials are enabled on SMDKV310, is it right?
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH] ARM: dts: exynos4: Enable serial controllers on Origen and SMDKV310
2012-09-08 2:36 ` Kukjin Kim
@ 2012-09-08 8:07 ` Tomasz Figa
0 siblings, 0 replies; 16+ messages in thread
From: Tomasz Figa @ 2012-09-08 8:07 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kgene,
On Saturday 08 of September 2012 11:36:30 Kukjin Kim wrote:
> Tomasz Figa wrote:
> > This patch adds status override of serial nodes to enable used serial
> > ports
> > on Origen and SMDKV310 board.
>
> Well...I'm not sure about the status of Origen serial, but all of the
> serials are enabled on SMDKV310, is it right?
According to arrays of struct s3c2410_uartcfg in mach-origen.c and mach-
smdkv310.c, all the four serial ports are enabled on both boards.
--
Best regards,
Tomasz Figa
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/3] ARM: dts: Exynos4 dts reorganization
2012-09-03 12:34 [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Tomasz Figa
` (2 preceding siblings ...)
2012-09-03 12:34 ` [PATCH 3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled Tomasz Figa
@ 2012-09-05 3:31 ` Thomas Abraham
2012-09-08 3:03 ` Kukjin Kim
2012-09-17 10:39 ` Kukjin Kim
3 siblings, 2 replies; 16+ messages in thread
From: Thomas Abraham @ 2012-09-05 3:31 UTC (permalink / raw)
To: linux-arm-kernel
On 3 September 2012 18:04, Tomasz Figa <t.figa@samsung.com> wrote:
> This patch series prepares existing Exynos4210 DT infrastructure to be
> further extended for new SoCs from Exynos4 line and new boards.
>
> Tomasz Figa (3):
> ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to
> Exynos4.dtsi
> ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210
> ARM: dts: exynos4: Assume status of all optional nodes as disabled
>
> arch/arm/boot/dts/exynos4.dtsi | 232 ++++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos4210-origen.dts | 58 +-------
> arch/arm/boot/dts/exynos4210-smdkv310.dts | 52 +------
> arch/arm/boot/dts/exynos4210.dtsi | 181 +----------------------
> arch/arm/mach-exynos/mach-exynos4-dt.c | 18 +--
> 5 files changed, 248 insertions(+), 293 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos4.dtsi
>
Thanks, we can build Exynos4412 device tree support on top of this series.
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 0/3] ARM: dts: Exynos4 dts reorganization
2012-09-05 3:31 ` [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Thomas Abraham
@ 2012-09-08 3:03 ` Kukjin Kim
2012-09-17 10:39 ` Kukjin Kim
1 sibling, 0 replies; 16+ messages in thread
From: Kukjin Kim @ 2012-09-08 3:03 UTC (permalink / raw)
To: linux-arm-kernel
Thomas Abraham wrote:
>
> On 3 September 2012 18:04, Tomasz Figa <t.figa@samsung.com> wrote:
> > This patch series prepares existing Exynos4210 DT infrastructure to be
> > further extended for new SoCs from Exynos4 line and new boards.
> >
> > Tomasz Figa (3):
> > ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to
> > Exynos4.dtsi
> > ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210
> > ARM: dts: exynos4: Assume status of all optional nodes as disabled
> >
> > arch/arm/boot/dts/exynos4.dtsi | 232
> ++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/exynos4210-origen.dts | 58 +-------
> > arch/arm/boot/dts/exynos4210-smdkv310.dts | 52 +------
> > arch/arm/boot/dts/exynos4210.dtsi | 181 +----------------------
> > arch/arm/mach-exynos/mach-exynos4-dt.c | 18 +--
> > 5 files changed, 248 insertions(+), 293 deletions(-)
> > create mode 100644 arch/arm/boot/dts/exynos4.dtsi
> >
>
> Thanks, we can build Exynos4412 device tree support on top of this series.
>
> Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Thomas, thanks for your ack on this series and I'm OK on this series.
But you know, Donjin Kim submitted almost same patch except gpio stuff one
month before this series but needs to update something though. So would be
nice if either Tomasz or Dongjin could ack on the other patch?
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/3] ARM: dts: Exynos4 dts reorganization
2012-09-05 3:31 ` [PATCH 0/3] ARM: dts: Exynos4 dts reorganization Thomas Abraham
2012-09-08 3:03 ` Kukjin Kim
@ 2012-09-17 10:39 ` Kukjin Kim
1 sibling, 0 replies; 16+ messages in thread
From: Kukjin Kim @ 2012-09-17 10:39 UTC (permalink / raw)
To: linux-arm-kernel
Kukjin Kim wrote:
>
> Thomas Abraham wrote:
> >
> > On 3 September 2012 18:04, Tomasz Figa <t.figa@samsung.com> wrote:
> > > This patch series prepares existing Exynos4210 DT infrastructure to be
> > > further extended for new SoCs from Exynos4 line and new boards.
> > >
> > > Tomasz Figa (3):
> > > ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to
> > > Exynos4.dtsi
> > > ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210
> > > ARM: dts: exynos4: Assume status of all optional nodes as disabled
> > >
> > > arch/arm/boot/dts/exynos4.dtsi | 232
> > ++++++++++++++++++++++++++++++
> > > arch/arm/boot/dts/exynos4210-origen.dts | 58 +-------
> > > arch/arm/boot/dts/exynos4210-smdkv310.dts | 52 +------
> > > arch/arm/boot/dts/exynos4210.dtsi | 181
+----------------------
> > > arch/arm/mach-exynos/mach-exynos4-dt.c | 18 +--
> > > 5 files changed, 248 insertions(+), 293 deletions(-)
> > > create mode 100644 arch/arm/boot/dts/exynos4.dtsi
> > >
> >
> > Thanks, we can build Exynos4412 device tree support on top of this
> series.
> >
> > Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
>
> Thomas, thanks for your ack on this series and I'm OK on this series.
>
> But you know, Donjin Kim submitted almost same patch except gpio stuff one
> month before this series but needs to update something though. So would be
> nice if either Tomasz or Dongjin could ack on the other patch?
>
Hmm...OK, I couldn't get any response from anyone so I will pick up this
patches. If any objection, please let me know.
Of course, if any regarding patches, need to work against on them.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 16+ messages in thread