From mboxrd@z Thu Jan 1 00:00:00 1970 From: geert+renesas@glider.be (Geert Uytterhoeven) Date: Fri, 20 Nov 2015 13:36:55 +0100 Subject: [PATCH 4/6] ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC In-Reply-To: <1448023017-21816-1-git-send-email-geert+renesas@glider.be> References: <1448023017-21816-1-git-send-email-geert+renesas@glider.be> Message-ID: <1448023017-21816-5-git-send-email-geert+renesas@glider.be> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Replace the "arm,cortex-a9-gic" compatible value for the GIC by "arm,pl390", as the documentation states it is a PL390. This has been confirmed by reading the GICD_IIDR register, which reports 0x0000043b (PL390 = 0x00, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven --- You can read the GICD_IIDR register from U-Boot using md 0xfe438008 1 --- arch/arm/boot/dts/r8a7778.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index da76f5d95875ce11..fd10197c7dba6d7d 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -61,7 +61,7 @@ }; gic: interrupt-controller at fe438000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; interrupt-controller; reg = <0xfe438000 0x1000>, -- 1.9.1