* [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.
@ 2015-11-25 6:46 Meng Yi
2015-11-25 6:46 ` [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel Meng Yi
2015-12-02 12:40 ` [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Shawn Guo
0 siblings, 2 replies; 5+ messages in thread
From: Meng Yi @ 2015-11-25 6:46 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9430a99..f01c98b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -428,6 +428,16 @@
<&platform_clk 1>;
};
+ dcu: dcu at 2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcu";
+ big-endian;
+ status = "disabled";
+ };
+
mdio0: mdio at 2d24000 {
compatible = "gianfar";
device_type = "mdio";
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel.
2015-11-25 6:46 [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Meng Yi
@ 2015-11-25 6:46 ` Meng Yi
2015-12-02 5:48 ` Shawn Guo
2015-12-02 12:40 ` [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Shawn Guo
1 sibling, 1 reply; 5+ messages in thread
From: Meng Yi @ 2015-11-25 6:46 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
---
arch/arm/boot/dts/ls1021a-twr.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index fbb89d1..fad2e3b 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -105,6 +105,17 @@
bitclock-master;
};
};
+
+ panel: panel {
+ compatible = "nec,nl4827hc19-05b";
+ };
+
+};
+
+&dcu {
+ fsl,panel = <&panel>;
+ status = "okay";
+
};
&dspi1 {
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel.
2015-11-25 6:46 ` [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel Meng Yi
@ 2015-12-02 5:48 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-12-02 5:48 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 25, 2015 at 02:46:07PM +0800, Meng Yi wrote:
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
> ---
> arch/arm/boot/dts/ls1021a-twr.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
> index fbb89d1..fad2e3b 100644
> --- a/arch/arm/boot/dts/ls1021a-twr.dts
> +++ b/arch/arm/boot/dts/ls1021a-twr.dts
> @@ -105,6 +105,17 @@
> bitclock-master;
> };
> };
> +
> + panel: panel {
> + compatible = "nec,nl4827hc19-05b";
> + };
> +
This new line shouldn't be needed.
> +};
> +
> +&dcu {
> + fsl,panel = <&panel>;
> + status = "okay";
> +
Ditto
I fixed them up and applied the both patches.
Shawn
> };
>
> &dspi1 {
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.
2015-11-25 6:46 [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Meng Yi
2015-11-25 6:46 ` [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel Meng Yi
@ 2015-12-02 12:40 ` Shawn Guo
2015-12-02 14:29 ` 答复: " Meng Yi
1 sibling, 1 reply; 5+ messages in thread
From: Shawn Guo @ 2015-12-02 12:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 25, 2015 at 02:46:06PM +0800, Meng Yi wrote:
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Forgot to mention that you missed adding your own SoB. Added when
applying.
Shawn
> ---
> arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 9430a99..f01c98b 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -428,6 +428,16 @@
> <&platform_clk 1>;
> };
>
> + dcu: dcu at 2ce0000 {
> + compatible = "fsl,ls1021a-dcu";
> + reg = <0x0 0x2ce0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&platform_clk 0>;
> + clock-names = "dcu";
> + big-endian;
> + status = "disabled";
> + };
> +
> mdio0: mdio at 2d24000 {
> compatible = "gianfar";
> device_type = "mdio";
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* 答复: [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.
2015-12-02 12:40 ` [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Shawn Guo
@ 2015-12-02 14:29 ` Meng Yi
0 siblings, 0 replies; 5+ messages in thread
From: Meng Yi @ 2015-12-02 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Thanks A lot!
Regards,
Yi Meng
________________________________________
???: Shawn Guo <shawnguo@kernel.org>
????: 2015?12?2? 20:40
???: Yi Meng-B56799
??: Jianwei Wang; devicetree at vger.kernel.org; Xiubo Li; Wang Huan-B18965; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
??: Re: [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.
On Wed, Nov 25, 2015 at 02:46:06PM +0800, Meng Yi wrote:
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Forgot to mention that you missed adding your own SoB. Added when
applying.
Shawn
> ---
> arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 9430a99..f01c98b 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -428,6 +428,16 @@
> <&platform_clk 1>;
> };
>
> + dcu: dcu at 2ce0000 {
> + compatible = "fsl,ls1021a-dcu";
> + reg = <0x0 0x2ce0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&platform_clk 0>;
> + clock-names = "dcu";
> + big-endian;
> + status = "disabled";
> + };
> +
> mdio0: mdio at 2d24000 {
> compatible = "gianfar";
> device_type = "mdio";
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-12-02 14:29 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-25 6:46 [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Meng Yi
2015-11-25 6:46 ` [PATCH 2/2] ARM: dts: ls1021a: Add a TFT LCD panel Meng Yi
2015-12-02 5:48 ` Shawn Guo
2015-12-02 12:40 ` [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node Shawn Guo
2015-12-02 14:29 ` 答复: " Meng Yi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).