[PATCH v2 net 0/6] Marvell Armada XP/370/38X Neta fixes

[mw@semihalf.com (Marcin Wojtas)]

Hi,

I updated the mvneta fixes patchset with minor corrections suggested by
Thomas Petazzoni.

I will be greatful for a feedback.

Best regards,
Marcin Wojtas

Changes from v2:
* Style fixes in patch updating mbus protection
* Remove redundant stable notifications except for patch 4/6

Changes from v1:
* update MBUS windows access protection register once, after whole loop
* add fixing value of MVNETA_RXQ_INTR_ENABLE_ALL_MASK
* add fixing error path for skb_build()
* add possibility of setting custom TX IP checksum limit in DT property

Marcin Wojtas (6):
  net: mvneta: add configuration for MBUS windows access protection
  net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REG
  net: mvneta: fix bit assignment for RX packet irq enable
  net: mvneta: fix error path for building skb
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: enable IP checksum with jumbo frames for Armada 38x on
    Port0

 .../bindings/net/marvell-armada-370-neta.txt       |  6 ++++
 arch/arm/boot/dts/armada-38x.dtsi                  |  1 +
 drivers/net/ethernet/marvell/mvneta.c              | 33 ++++++++++++++++++----
 3 files changed, 34 insertions(+), 6 deletions(-)

-- 
1.8.3.1