From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 08/13] ARM: factor out allocation routine from __create_mapping()
Date: Mon, 30 Nov 2015 13:28:22 +0100 [thread overview]
Message-ID: <1448886507-3216-9-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1448886507-3216-1-git-send-email-ard.biesheuvel@linaro.org>
To allow __create_mapping() to be used for populating UEFI Runtime
Services page tables, factor out the allocation routine 'early_alloc'
and pass it down as a function pointer into alloc_init_[pud|pmd|pte].
This way, new users of __create_mapping() can supply another allocation
function.
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/mm/mmu.c | 34 +++++++++++++-------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 3100de92148b..87dc49dbe231 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -724,21 +724,30 @@ static void __init *early_alloc(unsigned long sz)
return early_alloc_aligned(sz, sz);
}
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr,
+ unsigned long prot,
+ void *(*alloc)(unsigned long sz))
{
if (pmd_none(*pmd)) {
- pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
+ pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
__pmd_populate(pmd, __pa(pte), prot);
}
BUG_ON(pmd_bad(*pmd));
return pte_offset_kernel(pmd, addr);
}
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
+ unsigned long prot)
+{
+ return pte_alloc(pmd, addr, prot, early_alloc);
+}
+
static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
unsigned long end, unsigned long pfn,
- const struct mem_type *type)
+ const struct mem_type *type,
+ void *(*alloc)(unsigned long sz))
{
- pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
+ pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc);
do {
set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
pfn++;
@@ -774,7 +783,8 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
unsigned long end, phys_addr_t phys,
- const struct mem_type *type)
+ const struct mem_type *type,
+ void *(*alloc)(unsigned long sz))
{
pmd_t *pmd = pmd_offset(pud, addr);
unsigned long next;
@@ -795,7 +805,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
__map_init_section(pmd, addr, next, phys, type);
} else {
alloc_init_pte(pmd, addr, next,
- __phys_to_pfn(phys), type);
+ __phys_to_pfn(phys), type, alloc);
}
phys += next - addr;
@@ -805,14 +815,15 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
unsigned long end, phys_addr_t phys,
- const struct mem_type *type)
+ const struct mem_type *type,
+ void *(*alloc)(unsigned long sz))
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
do {
next = pud_addr_end(addr, end);
- alloc_init_pmd(pud, addr, next, phys, type);
+ alloc_init_pmd(pud, addr, next, phys, type, alloc);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
@@ -877,7 +888,8 @@ static void __init create_36bit_mapping(struct mm_struct *mm,
}
#endif /* !CONFIG_ARM_LPAE */
-static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md)
+static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
+ void *(*alloc)(unsigned long sz))
{
unsigned long addr, length, end;
phys_addr_t phys;
@@ -911,7 +923,7 @@ static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md)
do {
unsigned long next = pgd_addr_end(addr, end);
- alloc_init_pud(pgd, addr, next, phys, type);
+ alloc_init_pud(pgd, addr, next, phys, type, alloc);
phys += next - addr;
addr = next;
@@ -940,7 +952,7 @@ static void __init create_mapping(struct map_desc *md)
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
- __create_mapping(&init_mm, md);
+ __create_mapping(&init_mm, md, early_alloc);
}
/*
--
1.9.1
next prev parent reply other threads:[~2015-11-30 12:28 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 12:28 [PATCH v4 00/13] UEFI boot and runtime services support for 32-bit ARM Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 01/13] mm/memblock: add MEMBLOCK_NOMAP attribute to memblock memory table Ard Biesheuvel
2015-12-03 10:55 ` Ard Biesheuvel
2015-12-03 11:27 ` Alexander Kuleshov
2015-12-08 12:07 ` Will Deacon
2015-12-08 22:23 ` Andrew Morton
2015-12-09 11:29 ` Will Deacon
2015-11-30 12:28 ` [PATCH v4 02/13] arm64: only consider memblocks with NOMAP cleared for linear mapping Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 03/13] arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 04/13] arm64/efi: split off EFI init and runtime code for reuse by 32-bit ARM Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 05/13] arm64/efi: refactor " Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 06/13] ARM: add support for generic early_ioremap/early_memremap Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 07/13] ARM: split off core mapping logic from create_mapping Ard Biesheuvel
2015-11-30 12:28 ` Ard Biesheuvel [this message]
2015-11-30 12:28 ` [PATCH v4 09/13] ARM: add support for non-global kernel mappings Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 10/13] ARM: implement create_mapping_late() for EFI use Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 11/13] ARM: only consider memblocks with NOMAP cleared for linear mapping Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 12/13] ARM: wire up UEFI init and runtime support Ard Biesheuvel
2015-11-30 12:28 ` [PATCH v4 13/13] ARM: add UEFI stub support Ard Biesheuvel
2015-12-02 14:53 ` [PATCH v4 00/13] UEFI boot and runtime services support for 32-bit ARM Ard Biesheuvel
2015-12-03 10:18 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448886507-3216-9-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).