From mboxrd@z Thu Jan 1 00:00:00 1970 From: l.stach@pengutronix.de (Lucas Stach) Date: Wed, 2 Dec 2015 14:42:55 +0100 Subject: [PATCH] ARM: dts: imx6qdl: move GIC to right location in DT Message-ID: <1449063775-1146-1-git-send-email-l.stach@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org No functional change, just moving the node to the place where it belongs according to its unit address. Signed-off-by: Lucas Stach --- arch/arm/boot/dts/imx6qdl.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 8e203293ba2c..48a0495a045a 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -48,15 +48,6 @@ usbphy1 = &usbphy2; }; - intc: interrupt-controller at 00a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - clocks { #address-cells = <1>; #size-cells = <0>; @@ -156,6 +147,15 @@ clocks = <&clks IMX6QDL_CLK_TWD>; }; + intc: interrupt-controller at 00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache at 00a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; -- 2.6.2