From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] ARM: orion: always use MULTI_IRQ_HANDLER
Date: Wed, 2 Dec 2015 22:27:04 +0100 [thread overview]
Message-ID: <1449091629-2155735-3-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1449091629-2155735-1-git-send-email-arnd@arndb.de>
As a preparation for multiplatform support, this enables
the MULTI_IRQ_HANDLER code unconditionally on dove and
orion5x, and introduces the respective code on mv78xx0,
which did not have it so far. The classic entry-macro.S
files are removed as they are now obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/Kconfig | 3 ++
arch/arm/mach-dove/include/mach/entry-macro.S | 33 -------------------
arch/arm/mach-dove/irq.c | 12 +------
arch/arm/mach-mv78xx0/include/mach/entry-macro.S | 41 ------------------------
arch/arm/mach-mv78xx0/irq.c | 33 +++++++++++++++++++
arch/arm/mach-orion5x/include/mach/entry-macro.S | 25 ---------------
arch/arm/mach-orion5x/irq.c | 11 -------
arch/arm/plat-orion/irq.c | 1 -
arch/arm/plat-orion/mpp.c | 1 -
9 files changed, 37 insertions(+), 123 deletions(-)
delete mode 100644 arch/arm/mach-dove/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-mv78xx0/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-orion5x/include/mach/entry-macro.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 34e1569a11ee..227ff489a080 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -512,6 +512,7 @@ config ARCH_DOVE
select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
+ select MULTI_IRQ_HANDLER
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
@@ -525,6 +526,7 @@ config ARCH_MV78XX0
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
+ select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
help
@@ -538,6 +540,7 @@ config ARCH_ORION5X
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
+ select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
select MULTI_IRQ_HANDLER
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
deleted file mode 100644
index df1d44bdc375..000000000000
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #32
- ands \irqstat, \irqstat, \tmp
-
- @ if no low interrupts set, check high interrupts
- ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #64
- andeqs \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index bfb3703357c5..b1c7cae1486b 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <asm/exception.h>
#include <asm/mach/arch.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
@@ -109,14 +110,6 @@ static int __initdata gpio2_irqs[4] = {
0,
};
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
@@ -139,7 +132,6 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
-#endif
void __init dove_init_irq(void)
{
@@ -148,9 +140,7 @@ void __init dove_init_irq(void)
orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(dove_legacy_handle_irq);
-#endif
/*
* Initialize gpiolib for GPIOs 0-71.
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
deleted file mode 100644
index 6b1f088e0597..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no high interrupts set, check error interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
- ldr \tmp, [\base, #IRQ_MASK_ERR_OFF]
- mov \irqnr, #95
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 32073444024b..2453c33faccf 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <asm/exception.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
IRQ_MV78XX0_GPIO_24_31,
};
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+ if (stat) {
+ unsigned int hwirq = 64 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+
void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
+ set_handle_irq(mv78xx0_legacy_handle_irq);
+
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
deleted file mode 100644
index 73919a36b577..000000000000
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =MAIN_IRQ_CAUSE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0] @ main cause
- ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
- mov \irqnr, #0 @ default irqnr
- @ find cause bits that are unmasked
- ands \irqstat, \irqstat, \tmp @ clear Z flag if any
- clzne \irqnr, \irqstat @ calc irqnr
- rsbne \irqnr, \irqnr, #32
- .endm
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 086ecb87d885..8678db1eb1bd 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
asmlinkage void
__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
{
@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
-#endif
void __init orion5x_init_irq(void)
{
orion_irq_init(1, MAIN_IRQ_MASK);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion5x_legacy_handle_irq);
-#endif
/*
* Initialize gpiolib for GPIOs 0-31.
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 8c1fc06007c0..5b63b28b00ac 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -18,7 +18,6 @@
#include <asm/exception.h>
#include <plat/irq.h>
#include <plat/orion-gpio.h>
-#include <mach/bridge-regs.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7310bcfb299f..5b4ff9373c89 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -13,7 +13,6 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <plat/orion-gpio.h>
#include <plat/mpp.h>
--
2.1.0.rc2
next prev parent reply other threads:[~2015-12-02 21:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-02 21:27 [PATCH v2 0/7] ARM: orion5x/mv78xx0 multiplatform Arnd Bergmann
2015-12-02 21:27 ` [PATCH 1/7] ARM: orion: move watchdog setup to mach-orion5x Arnd Bergmann
2015-12-02 21:27 ` Arnd Bergmann [this message]
2015-12-02 21:27 ` [PATCH 3/7] ARM: orion: use SPARSE_IRQ everywhere Arnd Bergmann
2015-12-02 21:27 ` [PATCH 4/7] ARM: mv78xx0: clean up mach/*.h headers Arnd Bergmann
2015-12-02 21:27 ` [PATCH 5/7] ARM: mv78xx0: multiplatform support Arnd Bergmann
2015-12-02 21:27 ` [PATCH 6/7] ARM: orion5x: clean up mach/*.h headers Arnd Bergmann
2015-12-02 21:27 ` [PATCH 7/7] ARM: orion5x: multiplatform support Arnd Bergmann
2015-12-07 17:22 ` [PATCH v2 0/7] ARM: orion5x/mv78xx0 multiplatform Gregory CLEMENT
2015-12-08 10:05 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449091629-2155735-3-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox