From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Fri, 4 Dec 2015 09:45:45 -0800 Subject: [PATCH v2 2/5] ARM: bcm2835: Define two new packets from the latest firmware. In-Reply-To: <1449251148-19344-1-git-send-email-eric@anholt.net> References: <1449251148-19344-1-git-send-email-eric@anholt.net> Message-ID: <1449251148-19344-3-git-send-email-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org These packets give us direct access to the firmware's power management code, as opposed to GET/SET_POWER_STATE packets that only had a couple of domains implemented. Signed-off-by: Eric Anholt --- include/soc/bcm2835/raspberrypi-firmware.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index c07d74a..3fb3571 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -72,10 +72,12 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, RPI_FIRMWARE_SET_TURBO = 0x00038009, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, /* Dispmanx TAGS */ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, -- 2.6.2