From: chunfeng.yun@mediatek.com (chunfeng yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
Date: Sat, 5 Dec 2015 11:12:43 +0800 [thread overview]
Message-ID: <1449285163.11314.5.camel@mhfsdcap03> (raw)
In-Reply-To: <56619410.4000705@cogentembedded.com>
Hi,
On Fri, 2015-12-04 at 16:24 +0300, Sergei Shtylyov wrote:
> Hello.
>
> Sorry for the grammar nitpicking but since it's in the comments, I felt
> the necessity to comment.
>
> On 12/4/2015 5:40 AM, Chunfeng Yun wrote:
>
> > when ip fail to enter sleep mode, register access protection will
>
> Fails.
>
> > be disabed, at the same time if all clocks are disabled, access
> ^^^^^^^ disabled
>
> > register will hang up AHB bus.
> > the common case causes ip sleep fail is that after all ports enter
>
> Failure.
>
> > U3 but before ip enters sleep mode, a port receives a resume
> > signal('K'). this will happens when such as clicks mouse to try to
> > do remote wakeup to stop system enter suspend.
>
> Wake up.
>
> > so stop polling roothubs to avoid access xHCI register on bus
>
> Root hubs. Accessing.
>
> > suspend, and restart it when bus resume.
>
> Resumes. Or "is resumed", maybe?
>
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > drivers/usb/host/xhci-mtk.c | 23 +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> > index c9ab6a4..38635fb 100644
> > --- a/drivers/usb/host/xhci-mtk.c
> > +++ b/drivers/usb/host/xhci-mtk.c
> > @@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev)
> > }
> >
> > #ifdef CONFIG_PM_SLEEP
> > +/*
> > + * if ip sleep fail, and all clocks are disabled, access register will hang
>
> Fails.
>
> > + * AHB bus, so stop poll roothubs to avoid regs access on bus suspend.
>
> Polling.
>
> > + * and no need to check whether ip sleep fail or not; this will cause SPM to
>
> Failed.
>
> > + * wakeup system immediately after system suspend complete if ip sleep
>
> Wake up.
>
> > + * fail, it is what we wanted.
>
> Fails.
>
I do need to pay more attention to the grammar from now on.
Thanks a lot
> > + */
> [...]
>
> MBR, Sergei
>
prev parent reply other threads:[~2015-12-05 3:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 2:40 [PATCH] usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling Chunfeng Yun
2015-12-04 13:24 ` Sergei Shtylyov
2015-12-05 3:12 ` chunfeng yun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449285163.11314.5.camel@mhfsdcap03 \
--to=chunfeng.yun@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).